Lapping & polishing machine for intensive production of parts: Ø 5 to 160 mm

MM 8380 S

Version S with integrated pneumatic pressure system.

Dosing unit

System integrated to the machine driving by the control screen.

Production machines

This Ø 480 mm lapping machine has all the technical solutions of the large capacity models.

Plate Ø
480 mm
Plate rotation speed
from 15 to 90 rpm
Inner ring Ø
182 mm
Weight (kg)
300

See the full technical sheet

INTRODUCTION

M.M.9480

S version

The M.M.9480 S is the new 9000 series small diameter flat lapping machine.
This Ø 480 mm lapping machine has all the technical solutions of the large capacity models. Therefore, it is particularly robust and stable.

The support plate rests on a trust ball bearing, providing strong stability.

The gear motor is protected even in high pressure conditions.

Fully equipped in its standard version, it has an electronically controlled 3 cylinder arm.

The machine’s smaller size makes it easier for the operator to manipulate all the accessories, such as changing the plate or loading and unloading the rings.
All basic functions of this lapping machine built for production are integrated in the 5.7” touchscreen in an intuitive interface based on icons. This allows you to control all distributing units of the LAM PLAN range and to save 12 programmes.

Particularly suitable for maintenance workshops, production of small parts and finishing process on high end watchmaking parts.

VIDEO & VISUALS

Design
and advanced technology

It is a compact piece of equipment of the highest quality, which responds to the highest finishing requirements as well as intensive production.

All LAM PLAN videos on Youtube

M.M.9480 S version with rings and arms
M.M.9480 S version with AUTOPLAN
M.M.9480 S version

Non-contractual images

IN DETAIL

Technical characteristics
and equipment

Built-in modem

All M.M.9000 series machines are fitted with an integrated modem as standard in order to carry out remote maintenance operations. They are compatible with dedicated LAM PLAN distribution systems and can be optionally fitted with an abrasive and lubricant level sensor. Production data collection in the form of CSV files is possible via the USB interface.

Option AUTOPLAN

The M.M.9480 S is also compatible with the AUTOPLAN system for plate flatness reconditioning.

It enables to manage efficiently the flatness and the grooving of the plate. It is installable and removable in a few minutes thanks to fixation points integrated to the machine.

Version M.M.9380 S

Also available with a Ø 380 mm plate – M.M.9380 S

10 9380S 00

Downloads

Technical sheet

PDF 134 Ko

Catalogs

Catalogs page

Technical data M.M.9480 S version

Plate Ø	480 mm
Inner ring Ø	182 mm
Capacity per ring	1 part Ø 160 mm or 95 parts Ø 10 mm
Number of rings	3
Electric power supply	230 V single-phase
Motor Power	1.5 kW
Pressure application system	3 pneumatic cylinders
Pressure	10 to 600 N
Control	Touch screen 5,7 inches
Plate rotation speed	From 15 to 90 rpm
Dim. (W x H x D)	1160 x 860 x 1620 mm
Weight (without plate)	300 kg
Abrasive distribution system	Included Type depending on the plate
Reference	10 9480S 00

Options for M.M.9480 S

Flatness gauge for checking the flatness of the lapping plate

08 00899 00
Level sensors for diamond liquid and lubricating fluid

08 90001 00

ACCESSORIES & OPTIONS

Available accessories

Dosing unit type 709

08 01709 00
Peristaltic model dedicated to LAM PLAN machines.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: 0,5 ml/sec.
- Distribution system: nozzles not included
Dosing unit type 710

08 01710 00
Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: 0,5 ml/sec.
- Distribution system: nozzles not included
Dosing unit type 719

08 01719 00
Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: N.C.
- Distribution system: nozzles not included
Dosing pump type 8017
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 peristaltic pump + mixing system
- Bowl: useful volume 7 litres
- Electrical power supply: 220V single-phase
- Pump flow rate: 3,5 ml/sec.
- Distribution system: nozzle 813 on mobile stand supplied with the dosing unit
Designation
Qty. Capacity Ref.

Dosing pump type 8017 for LAM PLAN machine 1 7 litres 08 08017 00

Indepedent dosing pump type 8017 1 7 litres 08 18017 00
Dosing pump type 8003
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 vortex pump + mixing system
- Bowl: useful volume of 50 litres, on casters, drain valve
- Electrical power supply: 220V single-phase
- Pump flow rate: 50 litres/minute
- Distribution system: 3 swivelling outputs. Solenoid valve 3 tracks controlled by the sequencer included with the pump.
Designation
Qty. Capacity Ref.

Dosing pump type 8003 for LAM PLAN machine 1 50 litres W000 08003

Indepedent dosing pump type 8003 1 50 litres W001 08003
Dosing pump type 8007
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 vortex pump
- Bowl: useful volume 7 litres
- Electrical power supply: 220V single-phase
- Pump flow rate: 25 litres/minutes
- Distribution system: 3 swivelling outputs. Solenoid valve 3 tracks controlled by the sequencer included with the pump.
Designation
Qty. Capacity Ref.

Dosing pump type 8007 for LAM PLAN machine 1 7 litres W000 08007

Indepedent dosing pump type 8007 1 7 litres W001 08007
Autonomous dosing unit M.M.809B – Venturi
- Distribution system:
  – Distribution of 2 different liquids by Venturi system
  – 1 liquid compartment with an agitator
- Control: By analog buttons and timers
- Compressed air feed system: 2 bars
- Electrical power supply: 220 V single-phase- 50 Hz
- Dosing machine communication: 1 x 220 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.809B 1 with 2 glass bottles 500 cc 08 01809 10
Autonomous dosing unit M.M.909 – Peristaltic
- Distribution system: 3 standard peristaltic pumps with an outlet to drive an external pump
- Control: touch screen
- Electrical power supply: 220 V single-phase – 50 Hz
- Dosing machine communication: 1 x 24 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.909
ADAPTABLE VERSION
With a manual start/stop button 1 with 3 glass bottles 500 cc 08 03799 00

Stirrer 1 for glass bottle 500 cc 08 02816 00
Autonomous dosing unit M.M.909 HV – Peristaltic
- Distribution system: 2 standard peristaltic pumps, 1 large flow pump for high viscosity liquids and an outlet to drive an external pump
- Control: touch screen
- Electrical power supply: 220 V single-phase – 50 Hz
- Dosing machine communication: 1 x 24 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.909 HV 1 with 3 glass bottles 500 cc 08 00799100

Stirrer 1 for glass bottle 500 cc 08 02816 00
Cast iron conditioning rings 19″ (Ø 480 mm)

We carefully select special high quality cast iron for optimum, durable results. Suitable for all lapping machines, whatever the brand or size.

Available from stock or produced to order.

Ø in mm Qty. Ref.

Ext. Int.

218 182 1 U218 A0480
Ceramic conditioning rings with SPYLAP^® 19″ (Ø 480 mm)

Prevent mechanical distortion problems. The ceramic rings enable you to preserve the flatness of the plate, to manage its heating, as well as limiting contamination thanks to the absence of graphite.

The SPYLAP^® sensor enables the user to visually prevent a significant mechanical distortion of the lapping (or polishing) support and of the part to be lapped. The SPYLAP^® permanently monitors the temperature of the support and changes from black to red at a precisely predefined temperature.

Ø in mm Qty. Ref.

Ext. Int.

224 182 1 08 94803 00
Plastic rings 19″ (Ø 480 mm)

Ø in mm Qty. Ref.

Ext. Int.

224 183 1 09 94803 20