Peristaltic model dedicated to LAM PLAN machines.

• Capacity : 2 x 500 cc including 1 with agitator
• Electric power supply : 220V single phase + 24 V input for control
• Pump flow rate : 0,5 ml/seconde
• Distribution system : nozzles not included

Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.

• Capacity : 2 x 500 cc including 1 with agitator
• Electric power supply : 220V single phase + 24 V input for control
• Pump flow rate : 0,5 ml/seconde
• Distribution system : nozzles not included

Venturi model dedicated to LAM PLAN machines.

• Capacity : 2 x 500 cc including 1 with agitator
• Electric power supply : 220V single phase + 24 V input for control
• Pump flow rate : N.C.
• Distribution system : nozzles not included

• Distribution system: 3 standard peristaltic pumps with an outlet to drive an external pump
• Control: Touch screen
• Electrical power supply: 220 V single-phase – 50 Hz
• Dosing machine communication: 1 x 24 V input for machine servoing
  
  

• Distribution system: 2 standard peristaltic pumps, 1 large flow pump for high viscosity liquids and an outlet to drive an external pump
• Control: Touch screen
• Electrical power supply: 220 V single-phase – 50 Hz
• Dosing machine communication: 1 x 24 V input for machine servoing
  
  

Height: 73 cm
1 door
3 compartments

A system enabling obtention of flat surfaces at less than one micron, combined with a parallelism of quality between the lapped face and a reference.
The MESUREO is comprised of a perfectly flat pressure disc, which is able to transpose on a vertical axis, therefore producing pressure on the opposite face of the surface to be lapped.
The pressure plate is guided by a high precision ball bearing socket. Also, at the end of the polishing cycle, the parts contained by this tool will have a parallelism inferior to 5 microns.

The pressure surface is ceramic, assuring a long life, with no risk of metallic contamination. Finally, this tool is equipped with a wireless sensor, allowing visualisation of material removal in real time on a PC placed next to the lapping machine to which this device is connected.

The target dimension can be programmed. Therefore, the operator, via an intuitive colour range on the monitor, can instantly visualise whether or not the parts are within the defined thickness tolerance.

Des fontes spécifiques de haute qualité sélectionnées par nos soins pour des résultats optimums et durables. Adaptables sur toutes les machines à roder, quelles qu’en soient la marque et la taille. Disponibles sur stock ou réalisés à la demande.

Prévenez les problèmes de déformation mécanique. Les anneaux céramique vous permettent de préserver la planéité des plateaux, de maîtriser leur échauffement, tout en limitant la pollution grâce à l’absence de graphite.

Le détecteur SPYLAP^® permet à l’utilisateur de prévenir visuellement une déformation mécanique trop importante du support de rodage (ou de polissage) et des pièces à roder. Le SPYLAP^® capte en permanence la température du support et il passe du noir au rouge à une température précise prédéfinie.