Lapping/polishing machine for intensive production of parts: Ø 10 to 290 mm
• Version E: without integrated pneumatic pressure system.
• Version S: with pneumatic pressure, comprising three double-acting cylinders mounted on a fixed bracket.
- Anchoring points dosing systems
- Rigid and stable chassis
- Mounting plate for pneumatic pressure system
- Height adjustable arms
- Anchoring points for AUTOPLAN®
- False plate supported by a ball bearing.
Take control of your honing and polishing operations by creating new recipes, and evolve them using the programming interface for the machine and peripherals.
SMART LAPPING
Intuitive multi-step programming, with the option of storing up to 45 5-step programmes.
Technical characteristics and equipment
Options for M.M.9914 E and S
Downloads
Plug & play
Whether electrical or pneumatic, the connectivity of the machines has been designed to accommodate production support accessories in a simple way. When you plug in a piece of equipment, it is immediately recognised by the machine control system.
Control and programming
Take control of your honing and polishing operations by creating new recipes, and evolve them using the programming interface for the machine and peripherals.
Integrated modem
All M.M.9000 PREMIUM series machines come with an integrated modem for remote maintenance of the PLC.
They are compatible with dedicated LAM PLAN dosing units and can be fitted with an optional abrasive and lubricant level sensor.
Production data can be collected via the USB interface. Recipes can be imported and exported in CSV format. Recipes can be modified via Excel before being imported back into the machine.
Mechanical design
Integrating a LAM PLAN lapping solution goes beyond what is offered by conventional equipment on the market. We design machines ready to withstand the highest stresses.
M.M.9914 data sheets
M.M.9914 version E | M.M.9914 version S |
|
|---|---|---|
|
|
| |
|
914 mm
|
914 mm
| |
|
368 mm
|
368 mm
| |
|
1 part Ø 290 mm or 190 parts Ø 10 mm
|
1 part Ø 290 mm or 190 parts Ø 10 mm
| |
|
3
|
3
| |
|
400 V – 50 Hz – 3 phases + ground + neutral
|
400 V – 50 Hz – 3 phases + ground + neutral
| |
|
5,5 kW
|
5,5 kW
| |
|
7-inch touch screen
|
7-inch touch screen
| |
|
From 30 to 90 rpm
|
From 30 to 90 rpm
| |
|
–
|
3 adjustable double-acting pneumatic cylinders
| |
|
–
|
150 to 2500 N
| |
|
–
|
Fixed
| |
|
1900 x 1800 x 1500 mm
|
1900 x 1800 x 2300 mm
| |
|
875 kg
|
950 kg
| |
|
Optional – see table
|
Optional – see table
| |
|
10 9914E 00
|
10 9914S 00
|
Micrometric gauge
For a fast and precise check of your lapping plates, with a direct reading of the measurements. Precision: 1 µm.
The transport and storage case includes :
- 1 marble, accuracy : 0,8 µm.
- 1 gauge made of stabilised aluminium or stainless steel for machines Ø 200 to 600 mm.
- 1 micron comparator.
- 1 user guide with charts and mapping formulas.
Temperature control system P803
Flat lapping is based on the laws of mechanics and physics where a constant temperature is essential.
To control plate flatness, temperature must be regulated. The LAM PLAN P803 temperature regulation unit is reversable. It can also raise the plate temperature before use. This enables lapping to start in optimum geometric conditions in any work environment.
The P803 regulator is designed to maintain the temperature between 2 set values. It is an autonomous machine which has its own command interface.
Dedicated dosing units
Peristaltic and venturi dosing units 709, 710 and 719
This series of dispensers is fitted to LAM PLAN lapping machines. They are controlled from the machine interface and are fully integrated into the programming cycles. The different models can be used to dispense all types of products.
Peristaltic and vortex mixing dispensers 8017, 8003 and 8007
These dispensing systems are suitable for any type of abrasive immersed in a liquid. They solve the problem of settling and guarantee regular and guarantee regular, repeatable results.
M.M.2380 
+33 (0)4 50 43 96 30