With the SMARTLAM®3.0, LAM PLAN proposes an economic solution in terms of automatic pre-polishing and polishing of metallographic samples.
The SMARTLAM®3.0 is equipped with a new specific motorised head, composed with a 3 cells sample-holder and an individual pneumatic pressure system.
The moto reducer group has a high torque, the speed and the rotation can be set. The individual pneumatic pressure system handled by the electronic proportional valve, assures a great polishing regularity. The pressure applied per sample goes from 5 to 60 N.
The SMARTLAM®3.0 uses the reliable and proven base of the SMARTLAM®2.0 from which it conserves all the assets for a manual use (activation/deactivation of the sample holder head with the touch screen). The plate’s speed and rotation can be set from 20 to 650 rpm.
All the functions accomplished by the machine or the head are controlled by the screen. The programs can be stored in the intern memory.
For more efficiency, you can connect the M.M. 909 M automatic dosing unit to your SMARTLAM® 3.0 and benefit of a very economic and competitive set.
Ø 200 to 300 mm
Steel coated with epoxy paint
Removable resin basin for easy cleaning
3,5“ touch screen to control the machine: start/stop, timer, speed and direction of plate, water solenoid valve
Plate rotation speed
Variable from 20 to 650 rpm
Clockwise / counter-clockwise
Loads 9 programs
Slave connector for dosing unit
Removable pipe with flow-rate adjustment and safety solenoid valve
230 V - 50 Hz single-phase
6 bars, filtered 50 µm
Dim. W x H x D
580 x 570 x 670 mm
60 SL220 00
* SMARTLAM® 2.0 equipped with the SPRINGLAM®
Distribution of 3 different liquids.
3 peristaltic pumps, with 1 outlet to drive an external pump.
Ø 119 mm - 3 mm depth