Automatic polishing machine with central pressure, oscillating head and stock removal control

Powerful central-pressure head

Bidirectional rotation, variable speed and pressure.

5.7'' touch screen

User friendly interface.

Memorization of programs, integrating up to 8 steps.

  • Powerful central-pressure head

    Bidirectional rotation, variable speed and pressure.

  • 5.7'' touch screen

    User friendly interface.

    Memorization of programs, integrating up to 8 steps.

  • Ø Plate Capacity
    250 to 300 mm
  • Plate rotation speed
    20 to 650 rpm
  • Capacity
    Sample size in central pressure 6 x Ø 40 mm
  • Programming
    60 storable programs
See the full technical sheet
INTRODUCTION

MASTERLAM®1.0

Automatic, single-plate Ø 250 to 300 mm polishing machine with bidirectional rotation and variable speed.

Touch screen controls, intuitive and user friendly interface, MASTERLAM® machines are equipped with the best programming, parameter storage and export technologies. Control of the 4-circuit DISTRILAM® dosing unit directly integrated.

The MASTERLAM®1.0 is equipped with a powerful central-pressure head, bidirectional rotation, variable speed and pressure. The distinctive feature of this polishing head is the oscillation function with oscillation configurable both for amplitude and frequency.

The use of the oscillating head will allow you to achieve unrivalled levels of performance and versatility: it improves the quality of flatness, increases the stock removable and the service life of polishing supports (uniform wear due to the use of the entire surface of the plate.)

VIDEO & VISUALS

Design
and advanced technology

The MASTERLAM®1.0 is a high-performance machine intended for intensive use such as in-production inspections.

All LAM PLAN videos on Youtube
    Visuels non contractuels
    IN DETAIL

    Technical characteristics
    and equipment

    Options

    La MASTERLAM®1.0 with the oscillation* option, is particularly efficient for polishing large-sized samples and for superfinishing of mechanical components, prototypes or micro-series.

    A stock removal control system with an automatic “stop at measurement” function is also available (accurate to 0,02 mm).

    • Oscillation function
    • Stock removal control system

    Downloads

    Technical sheet

    PDF 247 Ko

    Catalogs

    Catalogs page

    Technical data MASTERLAM®1.0

    Plate capacity
    Ø 250 to 300 mm
    Body
    Steel coated with epoxy paint
    Bowl
    Removable, in resin, to ease cleaning
    Controls
    Touch screen (5,7“)
    Plate rotation speed
    Variable from 20 to 650 rpm
    Bidirectional rotation
    Head’s speed
    Variable from 10 to 150 rpm
    Bidirectional rotation
    Applicable load
    5 to 400 N central pressure
    Capacity
    Sample size in central pressure 6 x Ø 40 mm
    Head oscillation function
    Adjustable speed and amplitude (optional)
    Stock removal control function
    Stock removal measuring system with automatic stop, accurate to 0.02 mm (optional)
    Workspace lightening
    LED
    Water inlet
    Removable pipe, with flow rate adjustment and safety solenoid valve
    Programming
    60 storable programs, USB connector to backup programs and Ethernet port for networking
    Cumulative machine power
    1.1 kW
    Voltage
    230 V - 50 Hz single phase
    Pneumatic feed
    6 bars
    Dim. W x H x D
    550 x 670 x 670 mm
    Weight
    80 kg
    Reference
    60 ML100 00
    ACCESSORiES & OPTIONS

    Available accessories

    • Dosing unit DISTRILAM<sup>®</sup>
    • Transparent protective housing
    • Aluminium plates
    • Metal clamping rings
    • Tank reducer
    • Anti-splash ring
    • CP samples holder
    • Sample holder for irregular parts <img src="images/lamplan/general/icon-new.svg" alt="" width="80" height="19" />
    • Sedimentation 60 L tank
    • Dosing unit DISTRILAM®
      60 MLD00 00

      The automatic dosing unit DISTRILAM® is directly controlled via the touch screen on the machine through a RS 232 connector. It is instantly recognised by all the MASTERLAM® polishing devices as the control program is already programmed in the machines.

    • Transparent protective housing
      60 MLEP0 00

      The secured housing is a totally transparent protection compatible with the full range of MASTERLAM®.

      Its opening stops all movements of the machine*, it offers an integral protection complying with the 2006/42/ CE and 2004/108/CE standards. The housing’s design preserves the accessibility of the plate and does not clutter the workspace.

      The touch screen is located outside of the secured zone; therefore, the commands are permanently accessible.

      For the MASTERLAM®1.0 and 3.0 the touch screen control panel is located on the right, a 195 mm space needs to be foreseen in addition to the machine width.

      *Le capot transparent sécurisé autorise toute fois la mise en rotation du plateau en mode manuel.

      Required space for the MASTERLAM®1.0, 2.0 and 3.0:
      Width 770 mm - Height 910 mm.

    • Aluminium plates
      • Aluminium plate Ø 250 mm - 08 8270300
      • Aluminium plate Ø 300 mm - 08 8270400
    • Metal clamping rings
      • Metal clamping ring for Ø 250 mm plate - 60 SL00490
      • Metal clamping ring for Ø 300 mm plate - 60 SL00690
      • Metal clamping ring for Ø 305 mm plate - 60 SL00790
    • Tank reducer
      • Tank reducer Ø 250 mm - 60 ML08190
    • Anti-splash ring
      60 ML08091
    • CP samples holder
      • Ø 160 mm with 6 x Ø 20 to 40 mm water drop cells
        06MLC1000
      • Ø 160 mm with 9 x Ø 30 mm water drop cells
        06MLC3000
      • Ø 160 mm with 6 x Ø 40 mm water drop cells
        06MLC4000
      • Ø 160 mm with 5 x Ø 50 mm water drop cells
        06MLC5000
      • Ø 160 mm with 3 x rectangular 40 x 70 mm water drop cells
        06MLC1200
      • Ø 160 mm with 6 x rectangular 25 x 34 mm water drop cells
        06MLC1400
    • Sample holder for irregular parts
      60 MLC60 00

      Ø 160 mm central pressure sample holder for eccentric restriction of non-embedded complex geometric parts.

    • Sedimentation 60 L tank
      60 A00299 00

      With pump controlled by the machine.

    Diamond abrasive
    Fluids & lubricants
    Supports & accessories
    Visuels non contractuels

    In the same category Polishing

    • SMARTLAM®2.0
    • SMARTLAM®3.0
    • MASTERLAM®1.0
    • MASTERLAM®3.0
    • MASTERLAM®1.1
    • NEW RECTILAM®2.0
    • Fluids & lubricants
    • Bio DIAMANT® abrasive suspension
    • Finishing liquids
    • Bio DIAMANT® sticks & pastes
    • Accessories for polishing machines
    • Fixing accessories
    • Cleaning & storage accessories
    • Grinding & pre-polishing discs
    • CAMEO®DISK Platinium
    • CAMEO®DISK Silver, Gold & Rhodium
    • TOUCHLAM® discs

      Assistance & information

      The health situation makes it necessary to adapt our organization and the activity of our services.

      We will contact you

      Get a call from a LAM PLAN advisor.

      Contact us

      Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.

      Contact us

      Our social networks

      LAM PLAN® trademarks and patents

      • Lapping supports
      • Pre-polishing discs
      • Abrasive liquids
      • Polishing supports
      • Diamond polishing liquids
      • Diamond lapping liquids
      • Diamond superfinition products
      • Abrasive liquids

        All rights reserved © LAM PLAN SA
        Webmaster: Ctoutcom Studio

        Contact us

        LAM PLAN SA
        7, rue des Jardins - B.P.15
        74240 Gaillard - France
        header-receiver +33 (0)4 50 43 96 30
        Contact

        Our dealers

        Find

        Documentation
        & S.D.S

        Download