Skip to main content

High-capacity 2 or 3 axes programmable automatic cutting machine

Cutting arm

it combines 2 motorized movements

Cuts by successive passes in dives and in translation

Smartmotion

Intelligent advance management system

  • Wheel Ø
    355 (400 option) mm
  • Rotational speed
    from 1000 to 4000 rpm
  • Max cutting capacity
    Ø 127 mm
  • Dim. W x H x D
    877 x 1727 x 1800 mm
INTRODUCTION

CUTLAM®5.0

The CUTLAM®5.0 is a pedestal-mounted machine with an integrated recirculation/decanter tank. It represents the ultimate equipment in terms of high-capacity programmable automatic cutting machines. Power and advanced control of the cutting steps will guarantee first class efficiency and productivity.

Wheel and table movements

Fitted in standard with a Ø 355 mm wheel, which produces an automatic vertical and longitudinal movement. The automatic transverse movement is carried out by an optional cross-feed table.

All cutting modes are possible

- Automatic or manual cutting.
- Continuous automatic cutting with ingenious feed speed control:

  • The feed speed is pre-set, and will be automatically reduced if the load on the cutting wheel increases. The pre-set speed returns when the load on the screen decreases.
  • It improves the quality of the cut by limiting the thermal damages over the samples.
  • It is suitable for irregular samples and/or material with heterogeneous hardness.
  • It prevents the wheel from breaking in case of overload.
  • It allows you to work at maximum speed without any risk of damage.

- Automatic sequential cutting for maximum cooling.
- Plunge cutting, horizontal feed cutting and oscillating cutting.
- Repetitive parallel cutting.

Controls

Programming is performed via a large touch screen with a graphical interface that ensures you an intuitive use. Cutting parameters are continuously visible on the screen. Fast positioning of the cutting point is provided by the use of a joystick.

Easy programming

Depending on the location of the sample on the table, and on its dimensions, the screen will indicate the various necessary and possible moves in order to complete the cut. This data can then be saved.

VIDEO & VISUALS

Design
and advanced technology

A spacious cutting chamber: W 408 x D 422 mm with openings on both right and left sides for the cutting of long samples.

    Non-contractual images
    IN DETAIL

    Technical characteristics
    and equipment

    Theoretical cutting capacity

    *space under wheel

    A high-capacity, independent cooling/recirculation system (140 liters) is located under the machine. The multipoint nozzles insure excellent cooling of the sample and the cutting wheel even during intensive use.

    Fast cleaning is made possible thanks to an exterior shower head and a carefully designed cutting chamber.

    The wide cutting table: W 408 x D 422 mm is composed of two independent parts. 4 longitudinal grooves and 6 transversal grooves that allow to fix all kind of clamping systems available as options or on the market.

    Options

    • Machine for cut-off wheel Ø 400 mm
      60 CT503 00
    • Positioning laser
      60 CT506 00

    Machine variations

    • Machine with motorised cross-feed table (X axis) stroke 120 mm, accuracy 0,05 mm
      60 CT50A 10
    • Machine with motorised cross-feed table (X axis) stroke 380 mm, accuracy 0,05 mm
      60 CT50A 100

    Downloads

    Technical data CUTLAM®5.0

    Wheel Ø
    355 mm (400 mm optional)
    Shaft Ø
    25,4 mm
    Standard flanges Ø
    100 mm
    Max cutting capacity
    Ø 127 mm (with Ø 355 mm wheel) + opening on left and right hand side for long parts
    Passage under the wheel
    252,5 mm (Ø 355 mm wheel)
    Vertical movement
    Z axis stroke 350 mm, speed from 0,1 to 25 mm/sec, speed advanced 50 mm/sec
    Longitudinal movement
    Y axis stroke 350 mm speed from 0,1 to 25 mm/sec advanced speed 50 mm/sec
    Transversal movement
    X axis stroke 120 mm (optional)
    Lubrification
    Recirculation system, 140 litres, on casters
    Cleaning system integrated, with a shower head outside of the cutting chamber
    Motor power
    5,5 kW
    Rotational speed
    Variable, from 1000 to 4000 rpm
    Table 
    Treated aluminium and interchangeable stainless
    Steel plate, W 408 x D 422 mm
    Type of groove
    T-slots 12 mm (4 longitudinal, 6 transversal)
    Lightening
    LED strip
    Protection
    Cover with locking system
    Body
    Steel coated with epoxy paint
    Pneumatic feeding
    6 bars filtered 5 µ
    Electrical power
    12 kW combined
    Electrical consumption
    32 Ah
    Voltage
    400 Volts - 50 Hz (three-phase + ground)
    Dim. W x H x D
    877 (+ 600 mm with control panel) x 1727 x 1800 mm
    (H. cover open 2272 mm)
    Weight
    750 kg
    Reference
    60 CT50A 00
    ACCESSORIES & OPTIONS

    Available accessories

    • Double vice with fast tightening system (left and right side of the wheel)
      60 CT200 20

      2 x 2 elements vice, without sole, to obtain maximal length clamping
      Jaw width 80 mm
      Jaw height 45 mm
      T-slot 12 mm screw included
      Lever (left and right)

    • Double vice with fast tightening system (left and right side of the wheel)
      60 CT400 20

      2 x 2 element vice, without sole, to obtain maximal length clamping
      Jaws width 80 mm
      Jaws height 70 mm
      T-slot 12 mm screw included
      Lever (left and right)

    • Double vice with screw tightening system (left and right side of the wheel)
      60 CT200 40

      2 x 2 element vice, without sole, to obtain maximal length clamping
      Jaws width 80 mm
      Jaws height 45 mm
      T-slot 12 mm screw included
      Left and right levers

    • Universal clamping KOPAL 61
      60 081282 20
    • Lift for KOPAL 61
      60 081282 40
    • Long cam for KOPAL 61
      60 00285 90
    • Adaptor rings (by 5) for cut-off wheels
      • Steel Ø 32 x 25,4 mm - 60 00373 90
      • PVC Ø 32 x 25,4 mm - 60 00374 90
    • Oil mist extraction device - A1
      Oil mist extraction device - A1
      60 CT204 00

      The LAM PLAN vaccuming system extracts the "polluted" air inside the cutting chamber of your cutting machine.
      - A special multilayer filter will stop the smallest polluting particles, thus preventing their dispersion into the atmosphere.
      - The cutting fluid, in the liquid state, is returned to the cutting machine recirculation tank to be reused. (An evacuation is provided for this purpose on the vacuuming system).
      - A cartridge post-filter, located above the suction system, ensures a high filtration level, up to 99.97%.
      -An adapter part (LAM PLAN code 60CT20820) is provided to adapt the suction hose to the canopy of the LAM PLAN cutting machine.
      - The vacuuming system is mounted on a trolley with wheels, allowing an easy positioning.
      -A drain valve, located in the trolley, collects the condensate.

    • Pressure regulator filter kit for compressed air
      60 00375 90

      Indispensable to preserve the machines from impurities.

    Non-contractual images

    Assistance & information

    The health situation makes it necessary to adapt our organization and the activity of our services.

    We will contact you

    Get a call from a LAM PLAN advisor.

    Contact us

    Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


    Our social networks

    lam plan société gaillard
    With the support
    La Région Auvergne Rhône-Alpes

    Contact us

    LAM PLAN S.A.S
    7, rue des Jardins - B.P.15
    74240 Gaillard - France
    header-receiver +33 (0)4 50 43 96 30

    Our dealers

    All rights reserved © LAM PLAN S.A.S / Webmaster: Ctoutcom Studio