The sample is held in position using a vice-tightened holding arm and the wheel located outside the cutting chamber enables a micrometric movement along the Z axis; the movement can be tracked directly on the screen (accurate to 0,02 mm) Thanks to the zeroing system, very accurate parallel cuts can be performed.
A wide range of vices is available, enabling you to clamp any type of component or material. The cutting progress is either controlled manually or with a counterweight system specially adapted to delicate cuts. A rocker arm balances the implement weight, and another one permits to adjust the applied load with precision.
Fitted with a large-capacity (10 litres, large for the machine’s size), independent filtration/decanting/recirculation tank, it is easy to perform long cuts under ideal cooling conditions. The CUTLAM®micro 2.0 has been designed to simplify maintenance and cleaning operations, the base of the cutting chamber is equipped with an inlet filter to prevent the loss of small parts and components.
A 100 µm fabric filter at the decanter inlet filters out the largest particles, and the remainder of the filtration is accomplished by decanting into a compartmented tank.
75 to 200 mm
Standard flanges Ø
Lateral arm displacement
Stroke 80 mm (accuracy 0,02 mm)
2 x 200 g
Recirculation system, 10 litres, 2 compartment decantation tank, 100 µ fabric filter, recirculation pumps.
800 L/hour driven by the machine.
Variable, from 200 to 4000 rpm
Transparent cover with locking system
Touch screen 3,5“
Intuitive and graphic interface
230 V - 50 Hz single phase
Dim. W x H x D
430 x 300 x 450 mm
(H cover open: 644 mm)
60 CTM20 00