-
Wheel Ø75 to 150 mm
-
Rotational speedfrom 50 to 1500 rpm
-
Max cutting capacityØ 150 mm
-
Dim. W x H x D390 x 390 x 340 mm
CUTLAM®micro 1.1
The CUTLAM®micro 1.1 is a LAM PLAN laboratory micro-cutting machine.
Easy to use and economical. It is designed for precision cuts of the most sensitive materials.
The CUTLAM®micro 1.1 allows you to include a versatile and robust machine in your laboratory at a reasonable budget. Its speed range and cutting chamber capacity will enable you to use it for many applications with a variety of cutting wheels (diamond, AL203, etc.) up to 150 mm diameter.
The work piece is held by a vice-holding, the knob, located outside of the cutting chamber, which permits a micro metric movement of the Z-axis.
The cutting feed is controlled with a sliding weight system, allowing you to fine-tune the load applied for delicate and slow cuts.
Design
and advanced technology
Based on a robust aluminium frame with a painted metal body, the CUTLAM®micro 1.1 is stable and vibration free. The hinged transparent hood avoids any spraying outside the machine and allows easy access for clamping vices on the arm. The hood is fitted with a safety device which stop immediately the cutting wheel motor in case of an opening.
Technical characteristics
and equipment
Equipped with an independent decanting/ recirculation tank, you can easily make slow cuts in optimum conditions of cooling.
Included Equipment
-
Recirculation coolant system, 10 liters
-
Cylindrical sample holder with clamping screw: Ø 12 to 50 mm maxi
-
Set of flanges Ø 50 mm for cut-off wheels Ø 125 to 150 mm
Downloads
Technical data CUTLAM®micro 1.1
Wheel Ø | 75 to 150 mm |
Shaft Ø | 12,7 mm |
Standard flanges Ø | 50 mm |
Lateral arm displacement | Stroke 25 mm (accuracy 0,02 mm) |
Preload weight | 1 x 200 g |
Vertical movement | Manual |
Lubrication/Cooling | Recirculation system, 10 litres, 800 L/ hour pump driven by the machine |
Motor power | 0,18 kW |
Rotational speed | Variable, from 50 to 1500 rpm |
Body | Steel coated with epoxy paint |
Protection | Transparent cover with locking system |
Voltage | 230 V - 50 Hz single phase |
Dim. W x H x D | 390 x 390 x 340 mm (H cover open: 630 mm) |
Weight | 25 kg |
Reference | 60 CTM10 00 |
Available accessories
-
Sample holder with multi screw clamping for irregular parts
60 CTM03 50 -
Sample holder vice with clamping screw: Ø 12 mm maxi
60 CTM03 30 -
V sample holder with clamping screw: Ø 24 mm maxi
60 CTM03 20 -
Sample holder double vice with clamping screw: Ø 12 mm maxi
60 CTM03 40 -
Cylindrical sample holder with clamping screw: Ø 12 mm to 50 mm
60 CTM03 10 -
Small vice with clamping screw: Ø 12 mm
60 CTM02 10 -
Set of flanges Ø 35 mm for cut-off wheels Ø 75 to 100 mm
60 CTM01 10Pour disque de tronçonnage Ø 75 à 100 mm