High-capacity 2 or 3 axes programmable automatic cutting machine

Wheel Ø
355 (400 option) mm
Rotational speed
from 1000 to 4000 rpm
Max cutting capacity
Ø 127 mm
Dim. W x H x D
877 x 1727 x 1800 mm

INTRODUCTION

CUTLAM^®5.0

The CUTLAM^®5.0 is a pedestal-mounted machine with an integrated recirculation/decanter tank. It represents the ultimate equipment in terms of high-capacity programmable automatic cutting machines. Power and advanced control of the cutting steps will guarantee first class efficiency and productivity.

Wheel and table movements

Fitted in standard with a Ø 355 mm wheel, which produces an automatic vertical and longitudinal movement. The automatic transverse movement is carried out by an optional cross-feed table.

All cutting modes are possible

- Automatic or manual cutting.
- Continuous automatic cutting with ingenious feed speed control:

The feed speed is pre-set, and will be automatically reduced if the load on the cutting wheel increases. The pre-set speed returns when the load on the screen decreases.
It improves the quality of the cut by limiting the thermal damages over the samples.
It is suitable for irregular samples and/or material with heterogeneous hardness.
It prevents the wheel from breaking in case of overload.
It allows you to work at maximum speed without any risk of damage.

- Automatic sequential cutting for maximum cooling.
- Plunge cutting, horizontal feed cutting and oscillating cutting.
- Repetitive parallel cutting.

Controls

Programming is performed via a large touch screen with a graphical interface that ensures you an intuitive use. Cutting parameters are continuously visible on the screen. Fast positioning of the cutting point is provided by the use of a joystick.

Easy programming

Depending on the location of the sample on the table, and on its dimensions, the screen will indicate the various necessary and possible moves in order to complete the cut. This data can then be saved.

VIDEO & VISUALS

Design
and advanced technology

A spacious cutting chamber: W 408 x D 422 mm with openings on both right and left sides for the cutting of long samples.

All LAM PLAN videos on Youtube

Non-contractual images

IN DETAIL

Technical characteristics
and equipment

Theoretical cutting capacity

*space under wheel

A high-capacity, independent cooling/recirculation system (140 liters) is located under the machine. The multipoint nozzles insure excellent cooling of the sample and the cutting wheel even during intensive use.

Fast cleaning is made possible thanks to an exterior shower head and a carefully designed cutting chamber.

The wide cutting table: W 408 x D 422 mm is composed of two independent parts. 4 longitudinal grooves and 6 transversal grooves that allow to fix all kind of clamping systems available as options or on the market.

Options

Machine for cut-off wheel Ø 400 mm

60 CT503 00

Variantes machines

Machine with motorised cross-feed table (X axis) stroke 120 mm, accuracy 0,05 mm

60 CT50A 10
Machine with motorised cross-feed table (X axis) stroke 380 mm, accuracy 0,05 mm

60 CT50A 100

Downloads

Technical sheet

PDF 377 Ko

Catalogs

Catalogs page

Technical data CUTLAM^®5.0

Wheel Ø	355 mm (400 mm optional)
Shaft Ø	25,4 mm
Standard flanges Ø	100 mm
Max cutting capacity	Ø 127 mm (with Ø 355 mm wheel) + opening on left and right hand side for long parts
Passage under the wheel	252,5 mm (Ø 355 mm wheel)
Vertical movement	Z axis stroke 350 mm, speed from 0,1 to 25 mm/sec, speed advanced 50 mm/sec
Longitudinal movement	Y axis stroke 350 mm speed from 0,1 to 25 mm/sec advanced speed 50 mm/sec
Transversal movement	X axis stroke 120 mm (optional)
Lubrification	Recirculation system, 140 litres, on casters Cleaning system integrated, with a shower head outside of the cutting chamber
Motor power	5,5 kW
Rotational speed	Variable, from 1000 to 4000 rpm
Table	Treated aluminium and interchangeable stainless Steel plate, W 408 x D 422 mm
Type of groove	T-slots 12 mm (4 longitudinal, 6 transversal)
Lightening	LED strip
Protection	Cover with locking system
Body	Steel coated with epoxy paint
Pneumatic feeding	6 bars filtered 5 µ
Electrical power	12 kW combined
Electrical consumption	32 Ah
Voltage	400 Volts - 50 Hz (three-phase + ground)
Dim. W x H x D	877 (+ 600 mm with control panel) x 1727 x 1800 mm (H. cover open 2272 mm)
Weight	750 kg
Reference	60 CT50A 00

ACCESSORIES & OPTIONS

Available accessories

Double vice with fast tightening system (left and right side of the wheel)

60 CT200 20

2 x 2 elements vice, without sole, to obtain maximal length clamping
Jaw width 80 mm
Jaw height 45 mm
T-slot 12 mm screw included
Lever (left and right)
Double vice with fast tightening system (left and right side of the wheel)

60 CT400 20

2 x 2 element vice, without sole, to obtain maximal length clamping
Jaws width 80 mm
Jaws height 70 mm
T-slot 12 mm screw included
Lever (left and right)
Double vice with screw tightening system (left and right side of the wheel)

60 CT200 40

2 x 2 element vice, without sole, to obtain maximal length clamping
Jaws width 80 mm
Jaws height 45 mm
T-slot 12 mm screw included
Left and right levers
Universal clamping KOPAL 61

60 081282 20
Lift for KOPAL 61

60 081282 40
Long cam for KOPAL 61

60 00285 90
Adaptor rings (by 5) for cut-off wheels
- Steel Ø 32 x 25,4 mm - 60 00373 90
- PVC Ø 32 x 25,4 mm - 60 00374 90
Pressure regulator filter kit for compressed air

Indispensable to preserve the machines from impurities.

Cut-off wheels

Accessories & maintenance

Non-contractual images

Assistance & information

The health situation makes it necessary to adapt our organization and the activity of our services.

We will contact you

Get a call from a LAM PLAN advisor.

Contact us

Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.