Lapping & polishing machine for moderate production of small parts: Ø 5 to 130 mm

Plate Ø
610 mm
Plate rotation speed
from 30 to 90 rpm
Inner ring Ø
248 mm
Weight
400 kg

INTRODUCTION

M.M.8600

M.M.8600 machines is a lapping/polishing device that allow you to add in your workshop a finishing tool for flat surfaces for a reasonable cost.

The compactness and the control ergonomic facilitate setting up and usage. Simple and proven, equipped with a medium size plate, it enable you to elaborate small production with controlled costs.

Equipped with cast iron, DIALAM^®, NEW LAM M’M’^® or FAS^® plate, the machine will allow you to overcome all types of surface finishing defined by your specification (ex.: lapping, thickness abrasion, grinding, polishing…).

VIDEO & VISUALS

Design
and advanced technology

It's also adapted to the maintenances of all sealing parts
(ex.: gate lapping, safety valve or small mechanic seals).

Example of applications: Mixing plate

Non-contractual images

IN DETAIL

Technical characteristics
and equipment

These machines can be equipped with the patented NEW LAM^® M’M’plates. The various proposed accessories (dosing unit, FAS^® plates, polishing cloths….) allow adapting the basic machine to all specific applications (micromechanics, watchmaking industry, electronics, etc.)

Downloads

Technical sheet

PDF 303 Ko

Catalogs

Technical data M.M.8600

Plate Ø	610 mm
Inner ring Ø	248 mm
Capacity per ring	1 part Ø 210 mm or 320 parts Ø 5 mm
Number of rings	3
Electric power supply	230 V single-phase
Motor Power	2.2 kW
Control	3.5 inches’ touch screen
Plate rotation speed	From 30 to 90 rpm
Dim. (W x H x D)	1150 x 1150 x 1000 mm
Weight (without plate)	400 kg
Abrasive distribution system	Included Type depending on the plate
Reference	10 86010 00

ACCESSORIES & OPTIONS

Available accessories

Dosing unit type 709

08 01709 00
Peristaltic model dedicated to LAM PLAN machines.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: 0,5 ml/sec.
- Distribution system: nozzles not included
Dosing unit type 710

08 01710 00
Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: 0,5 ml/sec.
- Distribution system: nozzles not included
Dosing unit type 719

08 01719 00
Peristaltic model dedicated to LAM PLAN machines, recommended for oil-based products.
- Capacity: 2 x 500 cc including 1 with agitator
- Electric power supply: 220V single phase + 24 V input for control
- Pump flow rate: N.C.
- Distribution system: nozzles not included
Dosing pump type 8017
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 peristaltic pump + mixing system
- Bowl: useful volume 7 litres
- Electrical power supply: 220V single-phase
- Pump flow rate: 3,5 ml/sec.
- Distribution system: nozzle 813 on mobile stand supplied with the dosing unit
Designation
Qty. Capacity Ref.

Dosing pump type 8017 for LAM PLAN machine 1 7 litres 08 08017 00

Indepedent dosing pump type 8017 1 7 litres 08 18017 00
Dosing pump type 8003
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 vortex pump + mixing system
- Bowl: useful volume of 50 litres, on casters, drain valve
- Electrical power supply: 220V single-phase
- Pump flow rate: 50 litres/minute
- Distribution system: 3 swivelling outputs. Solenoid valve 3 tracks controlled by the sequencer included with the pump.
Designation
Qty. Capacity Ref.

Dosing pump type 8003 for LAM PLAN machine 1 50 litres W000 08003

Indepedent dosing pump type 8003 1 50 litres W001 08003
Dosing pump type 8007
Controlled by the machine interface or by integrated sequencer for the autonomous version.
- Pump type: 1 vortex pump
- Bowl: useful volume 7 litres
- Electrical power supply: 220V single-phase
- Pump flow rate: 25 litres/minutes
- Distribution system: 3 swivelling outputs. Solenoid valve 3 tracks controlled by the sequencer included with the pump.
Designation
Qty. Capacity Ref.

Dosing pump type 8007 for LAM PLAN machine 1 7 litres W000 08007

Indepedent dosing pump type 8007 1 7 litres W001 08007
Autonomous dosing unit M.M.809B - Venturi
- Distribution system:
  - Distribution of 2 different liquids by Venturi system
  - 1 liquid compartment with an agitator
- Control: By analog buttons and timers
- Compressed air feed system: 2 bars
- Electrical power supply: 220 V single-phase- 50 Hz
- Dosing machine communication: 1 x 220 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.809B 1 with 2 glass bottles 500 cc 08 01809 10
Autonomous dosing unit M.M.909 - Peristaltic
- Distribution system: 3 standard peristaltic pumps with an outlet to drive an external pump
- Control: touch screen
- Electrical power supply: 220 V single-phase - 50 Hz
- Dosing machine communication: 1 x 24 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.909
ADAPTABLE VERSION
With a manual start/stop button 1 with 3 glass bottles 500 cc 08 03799 00

Stirrer 1 for glass bottle 500 cc 08 02816 00
Autonomous dosing unit M.M.909 HV - Peristaltic
- Distribution system: 2 standard peristaltic pumps, 1 large flow pump for high viscosity liquids and an outlet to drive an external pump
- Control: touch screen
- Electrical power supply: 220 V single-phase - 50 Hz
- Dosing machine communication: 1 x 24 V input for machine servoing
Designation
Qty. Dim. Ref.

Dosing unit M.M.909 HV 1 with 3 glass bottles 500 cc 08 00799100

Stirrer 1 for glass bottle 500 cc 08 02816 00
Cast iron conditioning rings 24" (Ø 610 mm)

We carefully select special high quality cast iron for optimum, durable results. Suitable for all lapping machines, whatever the brand or size.

Available from stock or produced to order.

Ø in mm Qty. Ref.

Ext. Int.

286 248 1 U286 A0610
Ceramic conditioning rings with SPYLAP^® 24" (Ø 610 mm)

Prevent mechanical distortion problems. The ceramic rings enable you to preserve the flatness of the plate, to manage its heating, as well as limiting contamination thanks to the absence of graphite.

The SPYLAP^® sensor enables the user to visually prevent a significant mechanical distortion of the lapping (or polishing) support and of the part to be lapped. The SPYLAP^® permanently monitors the temperature of the support and changes from black to red at a precisely predefined temperature.

Ø in mm Qty. Ref.

Ext. Int.

290 248 1 08 81062 10
Plastic rings 24" (Ø 610 mm)

Ø in mm Qty. Ref.

Ext. Int.

290 248 1 08 86512 00

Accessories

Lapping supports

Polishing supports

Non-contractual images

Assistance & information

The health situation makes it necessary to adapt our organization and the activity of our services.

We will contact you

Get a call from a LAM PLAN advisor.

Contact us

Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.