Diamond abrasives

Bio DIAMANT® NEOLAP® abrasive slurries, liquids 241P series, ECOA®abrasive slurries, sticks & pastes

Bio DIAMANT® NEOLAP® abrasive slurries

All the experience of LAM PLAN in a new diamond abrasive with incomparable performances. In direct line with our famous Bio DIAMANT® range, the new NEOLAP® diamond abrasive slurries go even further in terms of efficiency and user comfort. The NEOLAP® diamond slurry is a top-of-the-range product featuring exceptional performances.

VOC-free products - Respect of users and environment

Sans COVThe products of our Bio DIAMANT® range are biodegradable by more than 70%. Non-toxic and harmless, they are neutral; the user’s working conditions are thus respected. Anticipation of new regulations in terms of Volatile Organic Compounds (VOCs). Consolidation of your ISO 14001 and ISO 26000 approach.

Biodegradable packaging - Reduction of your activity’s environmental impact

For the first time in the polishing industry, a diamond slurry is packed in a plastic bottle of vegetal origin which is 100% compostable according to standard 13432 (for 400 ml packagings).

High yield - Reduced consumption

After many years of development, LAM PLAN formulated a new range of diamond slurries whose performances are clearly better than those of the old generation of Bio DIAMANT® products.

The comparative tests conducted by LAM PLAN prove it. The results in terms of stock
removal are systematically better, which places NEOLAP® at the front of the diamond
abrasive market in terms of polishing efficiency and speed.

The wettability of these diamond slurries is specially designed and optimised for NEW LAM® M’M’ plates. The ease with which the diamond slurry is spread out over the plate’s surface allows obtaining rapidly an excellent abrasive film, which favours an immediate lapping.

Flatness

Contains specific additives to facilitate the mixing of the diamond slurry with the NEOFLUID lubricating fluid and improves the dissipation of heat from the plate during lapping.

Improved roughness

This new generation of diamond abrasive allows obtaining better roughness results while preserving a strong stock removal.

Easy cleaning

With water for NEOLAP® series 300 and 400.

Quality, procurement guarantee and total traceability

Conformity to the REACH regulation

LAM PLAN set up all the arrangements needed for its application in order to guarantee the quality and availability of all its products over the long term. All the substances contained in our preparations comply with the REACH regulation’s specifications.

Availability in monocrystalline and polycrystalline forms

Series 100 emulsion - monocrystalline.
Series 300 water base - monocrystalline.
Series 400 water base - polycrystalline.

Range

Use Top-of-the-range diamond abrasive specific for lapping polishing applications.
Positioning Ready-to-use, to be sprayed or dosed drop by drop.
It is indicated for all your lapping work on NEW LAM® M’M’ plates and polishing work on our range of polishing cloths.
Range Monocrystalline, polycrystalline - grains from 1/4 to 45 µm
Bases Water and emulsion
Packaging 400 ml - 2 L
Lubricants Water base 712 or NEOFLUID
Emulsion base 712 or NEOFLUID

Diamond slurries Bio DIAMANT® NEOLAP®Series 100

MONOCRYSTALLINE EMULSION

Diamond slurry, single face , lapping polishing VOC free, biodegradable.
Aqueous detergent.

    Pack. 400 ml Pack. 2 L 
 Types
µm Ref.  Ref. 
197 0,25 02 NO197 60 02 NO197 70
195 0,75 02 NO195 60 02 NO195 70
101 1 02 NO101 60 02 NO101 70
102 2 02 NO102 60 02 NO102 70
103 3 02 NO103 60 02 NO103 70
106 6 02 NO106 60 02 NO106 70
109 9 02 NO109 60 02 NO109 70
112 12 02 NO112 60 02 NO112 70
115 15 02 NO115 60 02 NO115 70
125 25 02 NO125 60 02 NO125 70
145 45 02 NO145 60 02 NO145 70

Diamond slurries Bio DIAMANT® NEOLAP®Series 300

MONOCRYSTALLINE WATER BASE

Diamond slurry, single face, lapping polishing VOC free, biodegradable.
Aqueous detergent

    Pack. 400 ml Pack. 2 L 
 Types
µm Ref.  Ref. 
397 0,25 02 NO397 60 02 NO397 70
395 0,75 02 NO395 60 02 NO395 70
301 1 02 NO301 60 02 NO301 70
302 2 02 NO302 60 02 NO302 70
303 3 02 NO303 60 02 NO303 70
306 6 02 NO306 60 02 NO306 70
309 9 02 NO309 60 02 NO309 70
312 12 02 NO312 60 02 NO312 70
315 15 02 NO315 60 02 NO315 70
325 25 02 NO325 60 02 NO325 70
345 45 02 NO345 60 02 NO345 70

Diamond slurries Bio DIAMANT® NEOLAP®Series 400

POLYCRYSTALLINE WATER BASE

Diamond slurry, single face, lapping polishing VOC free, biodegradable.
Aqueous detergent.

    Cond. 400 ml Cond. 2 L 
 Types
µm Ref.  Ref. 
497 0,25 02 NO497 60 02 NO497 70
495 0,75 02 NO495 60 02 NO495 70
401 1 02 NO401 60 02 NO401 70
402 2 02 NO402 60 02 NO402 70
403 3 02 NO403 60 02 NO403 70
406 6 02 NO406 60 02 NO406 70
409 9 02 NO409 60 02 NO409 70
412 12 02 NO412 60 02 NO412 70
415 15 02 NO415 60 02 NO415 70
425 25 02 NO425 60 02 NO425 70

Diamond slurries 241P

High performance, oil-based polycrystalline diamond abrasives.
The high lapping performances of these products allow obtaining excellent results in terms of brightness and roughness on very hard materials, such as ceramics or silicon carbide.

Containing additives which limit the diamond’s settling out, the suspension of these abrasives is thus facilitated and very rapid, which guarantees a perfect homogenisation of the product before usage. These ready-to-use- products can be used with the lubricating fluid 990-140 or 950-140. The formulation of these diamond slurries is particularly adapted to materials sensitive to water.

Parts are cleaned with Stanol or detergent 742.

Diamond slurries 241P

POLYCRYSTALLINE

Diamond slurry, single face lapping polishing, 0% of water.
No decantation.

    Pack. 500 ml 
 Types
µm Ref. 
99 241P 0,1 02 99241P 00
97 241P 0,25 02 97241P 00
01 241P 1 02 01241P 00
02 241P 2 02 02241P 00
03 241P 3 02 03241P 00
06 241P 6 02 06241P 00
09 241P 9 02 09241P 00
10 241P 10 02 10241P 00
14 241P 14 02 14241P 00
25 241P 25 02 25241P 00

Ecoa® abrasive slurries

New ranges of liquid slurries for double plate machines. The ECOA® range is carrying all
LAM PLAN’s knowledge in terms of classic and diamond slurries applied for polishing and
super-finishing on double plate machines. It is the guarantee of an efficient response to various materials.

Ready-to-use high quality industrial products

The manufacturing and the packaging are adapted to the constraints and consummation encountered in industrial production polishing.

Control your VOC emission

For many years, the LAM PLAN R&D department has been committed to develop new
products respecting the user’s health but also the environment without compromising the efficiency. Composed with a specific new generation binder, this slurry is VOC free (Volatile Organic Compounds).

Improved technical performances

The abrasive film, specially elaborated for double side lapping polishing assures a good distribution of the slurry on the polishing supports. The new generation formulations reduce heating during the polishing process and keep the abrasive film wet.

Improved roughness

The varied ECOA® range guarantees the best results with a high stock removal on all materials.

Easy cleaning

Specially conceived to limit and distribute the polishing residues, the ECOA® liquids can be washed easily with water or with aqueous detergents.

Respect the users and the environment

The products of the ECOA® range are biodegradable by more than 70%. Nontoxic and
harmless, the users’ working condition are thus respected. Also anticipating the new regulations concerning greenhouse gas emission. Consolidation of your ISO 14001 and
ISO 26000 approach.

Supply guarantee and total traceability

Conform to the REACH regulation

LAM PLAN established solutions to guarantee quality and availability of all its products on the long run. All the substances present in our preparations respond to the specifications of the REACH regulations. In order to facilitate your administrative process, all the safety data sheet (SDS) of our products are in compliance with the current legislation.

 

 

Ecoa® abrasive slurries

Multi Abrasive

Double side polishing.
Tailor-made development.

Available range (non exhaustive list).

 

 

Sticks Bio DIAMANT®

Bio DIAMANT

Stick Bio DIAMANT® M.M.140 A

Diamond pastes dosing stick for the finishing of watch parts.

Characteristics

The Bio DIAMANT® M.M.140 A stick is constituted of a solid chemical binder, soluble in water and oil. The Bio DIAMANT® M.M.140 A stick can be used with the M.M.712 fluid (water base) or with the M.M.705 fluid (oil base).

Applications

Particularly recommended for the watch parts. Easy to use, its yield and its abrasive quality allows obtaining exceptional results well known in this branch of industry. Its pairing with TOUCHLAM® polishing cloths authorises the final polishing of various materials and principally the ones used in the watchmaking field (brass, silver, stainless steel, stavax, coating, etc.). It is often used in restoring terminated parts, to remove micro-scratches, it can also be integrated in a complete production polishing process.

Use and presentation

This stick is intended for manual use. The accurate dosing of the paste distribution is
insured by a graduated drum. Each division represents 0.2 gram. This system allows loading any new polishing cloth with a perfectly repetitive material without direct contact with
the product.

Guidance
 Nature of cloth
Ø 150 mm Ø 200 mm Ø 250 mm Ø 300 mm Ø 400 mm
 Woven 0,2 g 0,2 g 0,4 g 0,4 g 0,6 g
 Flocked 0,3 g 0,4 g 0,5 g 0,6 g 0,7 g

Please adjust each operation according to the surface of the samples.

 

 Characteristics
Pack. µm Ref. 
Monocrystalline diamond
High concentration
10 g <1 01 MM149 00

Stick Bio DIAMANT® Series M.M.130

The sticks allow controlling the dosage in manual usage on lapping plates.
The diamond paste is distributed according to an accurate dosage, thanks to a drum, graduated every 0.2 g. The loading of the paste on the plate is insured to be repetitive and without finger contact.

Extra concentrated in monocrystalline diamond, these high performance sticks allow a
high and fast stock removal on all types of materials. Their high concentration facilitates
also the rapid acquisition of flat and shiny surfaces. The cleaning is done with water or detergent 742.

The M.M.130 series sticks are used for ROUGH operations.

 Characteristics
Types µm Ref. 
10 g
Rough
MM 131 25 01 MM131 00
MM 132 14 01 MM132 00
MM 133 12 01 MM133 00

Stick Bio DIAMANT® Series M.M.140

The sticks allow controlling the dosage in manual usage on lapping plates.
The diamond paste is distributed according to an accurate dosage, thanks to a drum, graduated every 0.2 g. The loading of the paste on the plate is insured to be repetitive and without finger contact.

Extra concentrated in monocrystalline diamond, these high performance sticks allow a
high and fast stock removal on all types of materials. Their high concentration facilitates
also the rapid acquisition of flat and shiny surfaces. The cleaning is done with water or detergent 742.

The M.M.140 series sticks are used for FINISHNG operations.

 Characteristics
Types µm Ref. 
10 g
Finishing
MM 141 9 01 MM141 00
MM 142 6 01 MM142 00
MM 143 3 01 MM143 00
MM 144 2 01 MM144 00
MM 145 1 01 MM145 00
MM140 A 0,75 01 MM149 00

Stick Bio DIAMANT® Series M.M.122

High concentration monocrystalline diamond sticks, for all rough and finishing operations.
The identification of grains of these sticks are colour coded in order to limit the risks of
committing mistakes during the use. The cleaning can be done with water, alcohol or detergent 742.

 Characteristics
Types µm Ref. 
10 g
Finishing on polishing support
025 122 1/4 01 97122 00
1 122 1 01 01122 00
3 122 3 01 03122 00
6 122 6 01 06122 00
9 122 9 01 09122 00
15 122 15 01 15122 00

Bio DIAMANT® pastes

Oil soluble pastes, with high diamond concentration, insuring an important productivity on hard and extra hard materials.
Use with lubricant type M.M. 705. These pastes are available in 1 to 90 µm grains.
The cleaning of your parts can be done with water or alcohol.

Bio DIAMANT® pastes Series 210

Diamond abrasive.
Lapping bore.
0% of water.
Lubrification anti-heating.

 Characteristics Types µm Ref. 
10 g
High yield abrasive
Hard and extra-hard materials
1 213 1 01 01213 00
3 213 3 01 03213 00
6 213 6 01 06213 00
8 213 8 01 08213 00
14 213 14 01 14213 00
25 213 25 01 25213 00
40 213 40 01 40213 00
60 213 60 01 60213 00
90 213 90 01 90213 00

Diadoseurs Bio DIAMANT®

Necessary quantity to load a new cloth
 Ø of the cloth
Ø 150 mm Ø 200 mm Ø 250 mm Ø 300 mm Ø 400 mm
 Woven 0,2 g 0,2 g 0,4 g 0,4 g 0,6 g
 Flocked 0,3 g 0,4 g 0,5 g 0,6 g 0,7 g
 

 

Bio DIAMANT® gels Series 400

Concentrated diamond abrasive.
Ultra precise distribution.
Repeatability of the distribution.

 

 Characteristics
Types µm Ref. 
30 g
Diadoseur precision
Finishing on rods
01 400 1 01 01400 30
03 400 3 01 03400 30
06 400 6 01 06400 30
08 400 8 01 08400 30
14 400 14 01 14400 30
25 400 25 01 25400 30

In the same category Consumables

  • Diamond abrasives

  • Lubricating fluids

  • Composite abrasives

  • Additives, lubricants & oils

    Assistance & information

    We will contact you

    Get a call from a LAM PLAN advisor.

    Call us

    For all your technical or commercial requests


    Our social networks

    • Lapping supports
    • Pre-polishing discs
    • Abrasive liquids
    • Polishing supports
    • Diamond polishing liquids
    • Diamond lapping liquids
    • Diamond superfinition products
    • Abrasive liquids

      All rights reserved © LAM PLAN SA 2019
      Made by : CtoutcomStudio

      Contact us

      LAM PLAN SA
      7, rue des Jardins - B.P.15
      74240 Gaillard - France
      header-receiver +33 (0)4 50 43 96 30

      Our dealers