Composite abrasives
Abrasive compounds, liquids, pastes & powder, BIOLAM®, AQUA LAM®, BIOJET plus, BIOLAP®
CLASSICAL composite abrasives
Lapping on cast iron plates
A high-performance product which has proven its adaptability to all usage, especially for large tanks and intensive usage. According to the concentration intended, 1 litre of abrasive solution allows obtaining between 5 and 10 litres of abrasive.
Advantages
- Increasing working speed.
- Easy resuspension of the mixture.
- Soft abrasive film, efficient and balanced.
- Very low smell.
- Low running costs.
- Easy cleaning. Detergent 711-103.
- Ingenious packaging: packs 2 x 2 liters stackable and 4 x 2 liters (reduced handling).
Concentrated abrasive slurry, easy-to-use and easy cleaning.
1 pack of 2 x 2 liters = 20 to 30 liters of solution. These products allow working with abrasive concentration adjustable to usage. Requiring a brewing while using it. Easy resuspension. Compatible with the additive 716.
CLASSICAL composite abrasive Aluminium Oxide (AI2O3)
The CLASSICAL composite abrasive is also available in Boron carbide (B4C) and cerium oxide (CeO2). Other grains on demand.
| Pack 2 x 2 L | Pack 4 x 2 L | ||
| FEPA |
µm | Ref. | Ref. |
| 180 | 74 | A074 S12L2 | A074 S12L4 |
| 220 | 62 | A062 S12L2 | A062 S12L4 |
| 240 | 45 | A045 S12L2 | A045 S12L4 |
| 280 | 37 | A037 S12L2 | A037 S12L4 |
| 320 | 29 | A029 S12L2 | A029 S12L4 |
| 360 | 23 | A023 S12L2 | A023 S12L4 |
| 400 | 17 | A017 S12L2 | A017 S12L4 |
| 500 | 13 | A013 S12L2 | A013 S12L4 |
| 600 | 9 | A009 S12L2 | A009 S12L4 |
| 800 | 7 | A007 S12L2 | A007 S12L4 |
| 1000 | 5 | A005 S12L2 | A005 S12L4 |
| 1200 | 3 | A003 S12L2 | A003 S12L4 |
| 1500 | 1 | A001 S12L2 | A001 S12L4 |
CLASSICAL composite abrasive Silicon carbide (SIC)
The CLASSICAL composite abrasive is also available in Boron carbide (B4C) and Cerium oxide (CeO2). Other grains on demand.
| Pack 2 x 2 L | Pack 4 x 2 L | ||
| FEPA |
µm | Ref. | Ref. |
| 180 | 74 | E074 S12L2 | E074 S12L4 |
| 220 | 62 | E062 S12L2 | E062 S12L4 |
| 240 | 45 | E045 S12L2 | E045 S12L4 |
| 280 | 37 | E037 S12L2 | E037 S12L4 |
| 320 | 29 | E029 S12L2 | E029 S12L4 |
| 360 | 23 | E023 S12L2 | E023 S12L4 |
| 400 | 17 | E017 S12L2 | E017 S12L4 |
| 500 | 13 | E013 S12L2 | E013 S12L4 |
| 600 | 9 | E009 S12L2 | E009 S12L4 |
| 800 | 7 | E007 S12L2 | E007 S12L4 |
| 1000 | 5 | E005 S12L2 | E005 S12L4 |
| 1200 | 3 | E003 S12L2 | E003 S12L4 |
BIOLAM® composite abrasives
Conventional abrasive
Lapping on cast iron plate
Biodegradable
A new generation of biodegradable abrasive slurries developed by our Research and Development services. Very useful for the lapping machine equipped with a medium size tank.
Advantages
- Easy to use and to put in work.
- Low decantation of the abrasive, regularity of results.
- Consistent and ready abrasive film.
- No dangerous substances.
- Low running costs.
- Very low smell.
- Simple and easy cleaning (ex: water or water + ordinary detergent).
- Compact packaging: 2 and 20 litres jerrycans other packaging on demand.
BIOLAM®PLUS to dilute and BIOLAM S ready-to-use
Plus: Smooth abrasive slurry, no smell, biodegradable, easy to clean. Limited decantation, no additive needed. dilute 1 to 5 times in water.
S: Biodegradable and no smell liquid slurry, non-toxic.
Easy to clean. Simple usage: to put directly in the abrasive tank of the machine, limited decantation.
Depending of the use can be used pure or can be diluted up to 2 times in water.
BIOLAM®PLUS to dilute Aluminium oxide (AI2O3)
| Can 2 L | Can 20 L | ||
| FEPA |
µm | Ref. | Ref. |
| 100 | 125 | A125 V92L1 | A125 V9020 |
| 120 | 105 | A105 V92L1 | A105 V9020 |
| 150 | 88 | A088 V92L1 | A088 V9020 |
| 180 | 74 | A074 V92L1 | A074 V9020 |
| 220 | 62 | A062 V92L1 | A062 V9020 |
| 240 | 45 | A045 V92L1 | A045 V9020 |
| 280 | 37 | A037 V92L1 | A037 V9020 |
| 320 | 29 | A029 V92L1 | A029 V9020 |
| 360 | 23 | A023 V92L1 | A023 V9020 |
| 400 | 17 | A017 V92L1 | A017 V9020 |
| 500 | 13 | A013 V92L1 | A013 V9020 |
| 600 | 9 | A009 V92L1 | A009 V9020 |
| 800 | 7 | A007 V92L1 | A007 V9020 |
| 1000 | 5 | A005 V92L1 | A005 V9020 |
| 1200 | 3 | A003 V92L1 | A003 V9020 |
| 1400 | 2 | A002 V92L1 | A002 V9020 |
| 1500 | 1 | A001 V92L1 | A001 V9020 |
| 2000 | 0,4 | CP40 V92L1 | |
| 2200 | 0,2 | CP20 V92L1 | |
| 4500 | 0,05 | CP05 V92L1 |
BIOLAM®S ready-to-use Aluminium oxide (AI2O3)
| Can 2 L | Can 20 L | ||
| FEPA |
µm | Ref. | Ref. |
| 150 | 88 | A088 V62L1 | A088 V6020 |
| 180 | 74 | A074 V62L1 | A074 V6020 |
| 220 | 62 | A062 V62L1 | A062 V6020 |
| 240 | 45 | A045 V62L1 | A045 V6020 |
| 280 | 37 | A037 V62L1 | A037 V6020 |
| 320 | 29 | A029 V62L1 | A029 V6020 |
| 360 | 23 | A023 V62L1 | A023 V6020 |
| 400 | 17 | A017 V62L1 | A017 V6020 |
| 500 | 13 | A013 V62L1 | A013 V6020 |
| 600 | 9 | A009 V62L1 | A009 V6020 |
| 800 | 7 | A007 V62L1 | A007 V6020 |
| 1000 | 5 | A005 V62L1 | A005 V6020 |
| 1200 | 3 | A003 V62L1 | A003 V6020 |
| 1500 | 1 | A001 V62L1 | A001 V6020 |
| 2000 | 0,4 | CP40 V62L1 | CP40 V6020 |
| 2200 | 0,2 | CP20 V62L1 | CP20 V6020 |
| 4500 | 0,05 | CP05 V62L1 | CP05 V6020 |
BIOLAM®PLUS to dilute Silicon carbide (SIC)
| Can 2 L | Can 20 L | ||
| FEPA |
µm | Ref. | Ref. |
| 80 | 177 | E177 V92L1 | E177 V9020 |
| 100 | 125 | E125 V92L1 | E125 V9020 |
| 120 | 105 | E105 V92L1 | E105 V9020 |
| 180 | 74 | E074 V92L1 | E074 V9020 |
| 220 | 62 | E062 V92L1 | E062 V9020 |
| 240 | 45 | E045 V92L1 | E045 V9020 |
| 280 | 37 | E037 V92L1 | E037 V9020 |
| 320 | 29 | E029 V92L1 | E029 V9020 |
| 360 | 23 | E023 V92L1 | E023 V9020 |
| 400 | 17 | E017 V92L1 | E017 V9020 |
| 500 | 13 | E013 V92L1 | E013 V9020 |
| 600 | 9 | E009 V92L1 | E009 V9020 |
| 800 | 7 | E007 V92L1 | E007 V9020 |
| 1000 | 5 | E005 V92L1 | E005 V9020 |
| 1200 | 3 | E003 V92L1 | E003 V9020 |
BIOLAM®S ready-to-use Silicon carbide (SIC)
| Can 2 L | Can 20 L | ||
| FEPA |
µm | Ref. | Ref. |
| 80 | 177 | E177 V62L1 | E177 V6020 |
| 100 | 125 | E125 V62L1 | E125 V6020 |
| 120 | 105 | E105 V62L1 | E105 V6020 |
| 150 | 88 | E088 V62L1 | E088 V6020 |
| 180 | 74 | E074 V62L1 | E074 V6020 |
| 220 | 62 | E062 V62L1 | E062 V6020 |
| 240 | 45 | E045 V62L1 | E045 V6020 |
| 280 | 37 | E037 V62L1 | E037 V6020 |
| 320 | 29 | E029 V62L1 | E029 V6020 |
| 360 | 23 | E023 V62L1 | E023 V6020 |
| 400 | 17 | E017 V62L1 | E017 V6020 |
| 500 | 13 | E013 V62L1 | E013 V6020 |
| 600 | 9 | E009 V62L1 | E009 V6020 |
| 800 | 7 | E007 V62L1 | E007 V6020 |
| 1000 | 5 | E005 V62L1 | E005 V6020 |
| 1200 | 3 | E003 V62L1 | E003 V6020 |
| 1360 | 1,5 | F1P5 V62L1 | F1P5 V6020 |
| 1500 | 1 | F001 V62L1 | F001 V6020 |
| 1800 | 0,7 | FP70 V62L1 | FP70 V6020 |
BIOLAM®PLUS Cerium oxide (CeO2)
Finishing Liquid for the finishing on glass, sapphire and plastic.
Dilute 2 to 5 times in water.
| Can 2 L | ||
| FEPA |
µm | Ref. |
| 1200 | 3 | I003 V92L1 |
| 1300 | 2 | I002 V92L1 |
| 1400 | 1 | I001 V92L1 |
AQUA LAM® colloidal silica
Super-finishing
Simplified cleaning
The colloidal silicas are stabilised suspensions with fine non-agglomerated spherical
particles. This aqueous solution contains a high concentration of nanoscale silica.
During usage, colloidal silicas are generally diluted in water to proportions between 10 and 50%. We advise a 20% dilution in water for an optimum use.
These products are always used for super-finishing.
AQUA LAM® colloidal silica S.W. 30
Chemical-mechanical abrasive for compatible material
Super-finishing standard liquid to use pure or diluted up to 50%
Silica concentration: 30%
Size of particles: 30 nm
pH = 10
| Packaging |
Ref. |
| 5 liters tin | Z000 A25L1 |
| 10 liters tin | Z000 A2010 |
AQUA LAM® colloidal silica S.W. 36
Silica concentration: 50%
Size of particles: 50 nm
pH = 9
| Packaging | Ref. |
| 5 liters tin | Z000 C55L1 |
| 10 liters tin | Z000 C5610 |
AQUA LAM® colloidal silica NOVAL S finishing
Super-finishing liquid. Obtaining ultra-low roughness
Contains an additive “anti-crystallisation” which facilitate the cleaning of the parts and the machines. Silica concentration: 30%
Size of particles: 30 nm
pH = 10
| Packaging | Ref. |
| 5 liters tin | Z000 F75L1 |
| 10 liters tin | Z000 F7010 |
| 20 liters tin | Z000 F7020 |
AQUA LAM® colloidal silica NOVAL concentrated
Formulated to be added to pure colloidal silica
Additive that cancels crystallisation and decantation of the pure colloidal silica pure
Increases the stock removal, powers the roughness
Silica concentration: 35%
Size of particles: 30 nm
pH = 9
| Packaging | Ref. |
| 10 liters tin | Z000 F8010 |
| 20 liters tin | Z000 F8020 |
BIOLAP® abrasive compounds
Concentrated fluid abrasive pastes. Oil base, auto-lubricants, intended for the lapping of parts between them and/or cylindrical lapping. Biodegradables, no smell, no dangerous substances.
 |
 |
| BIOLAP® L Series | BIOLAP® Cr L Series |
Advantages
- VOC free
- No water spots
- Alumina base, silicon carbide or boron carbide
- Grains from 0,05 to 125 microns
- Biodegradable products
- Low viscosity
- Packaging: in 50 and 250 cm3 pots
BIOLAP® paste L series Aluminium oxide (AI2O3)
Conventional abrasives
Complex parts Lapping polishing
Fluid texture
For personalised formulation please contact us (free estimate).
| Pot 50 cm3 | Pot 250 cm3 | ||
| FEPA |
µm | Ref. | Ref. |
| 100 | 125 | A125 O3P05 | A125 O3P25 |
| 120 | 105 | A105 O3P05 | A105 O3P25 |
| 150 | 88 | A088 O3P05 | A088 O3P25 |
| 180 | 74 | A074 O3P05 | A074 O3P25 |
| 220 | 62 | A062 O3P05 | A062 O3P25 |
| 240 | 45 | A045 O3P05 | A045 O3P25 |
| 280 | 37 | A037 O3P05 | A037 O3P25 |
| 320 | 29 | A029 O3P05 | A029 O3P25 |
| 360 | 23 | A023 O3P05 | A023 O3P25 |
| 400 | 17 | A017 O3P05 | A017 O3P25 |
| 500 | 13 | A013 O3P05 | A013 O3P25 |
| 600 | 9 | A009 O3P05 | A009 O3P25 |
| 800 | 7 | A007 O3P05 | A007 O3P25 |
| 1000 | 5 | A005 O3P05 | A005 O3P25 |
| 1200 | 3 | A003 O3P05 | A003 O3P25 |
| 1500 | 1 | A001 O3P05 | A001 O3P25 |
| 1800 | 0,7 | CP70 O3P05 | CP70 O3P25 |
| 2000 | 0,4 | CP40 O3P05 | CP40 O3P25 |
| 2200 | 0,2 | CP20 O3P05 | CP20 O3P25 |
| 4500 | 0,05 | CP05 O3P05 | CP05 O3P25 |
BIOLAP® paste Cr L series Aluminium oxide (AI2O3)
Conventional abrasives and chromium oxide
Lapping polishing
Operations under high constraints
Resistant to friction and heating
For personalised formulation please contact us (free estimate).
| Pot 50 cm3 | Pot 250 cm3 | ||
| FEPA |
µm | Ref. | Ref. |
| 100 | 125 | A125 O5P05 | A125 O5P25 |
| 120 | 105 | A105 O5P05 | A105 O5P25 |
| 150 | 88 | A088 O5P05 | A088 O5P25 |
| 180 | 74 | A074 O5P05 | A074 O5P25 |
| 220 | 62 | A062 O5P05 | A062 O5P25 |
| 240 | 45 | A045 O5P05 | A045 O5P25 |
| 280 | 37 | A037 O5P05 | A037 O5P25 |
| 320 | 29 | A029 O5P05 | A029 O5P25 |
| 360 | 23 | A023 O5P05 | A023 O5P25 |
| 400 | 17 | A017 O5P05 | A017 O5P25 |
| 500 | 13 | A013 O5P05 | A013 O5P25 |
| 600 | 9 | A009 O5P05 | A009 O5P25 |
| 800 | 7 | A007 O5P05 | A007 O5P25 |
| 1000 | 5 | A005 O5P05 | A005 O5P25 |
| 1200 | 3 | A003 O5P05 | A003 O5P25 |
| 1500 | 1 | A001 O5P05 | A001 O5P25 |
| 1800 | 0,7 | CP70 O5P05 | CP70 O5P25 |
| 2000 | 0,4 | CP40 O5P05 | CP40 O5P25 |
| 2200 | 0,2 | CP20 O5P05 | CP20 O5P25 |
| 4500 | 0,05 | CP05 O5P05 | CP05 O5P25 |
BIOLAP® paste L series Silicon carbide (SIC)
Conventional abrasives
Complex parts Lapping polishing
Fluid texture
For personalised formulation please contact us (free estimate).
| Pot 50 cm3 | Pot 250 cm3 | ||
| FEPA |
µm | Ref. | Ref. |
| 80 | 177 | E177 O3P05 | E177 O3P25 |
| 100 | 125 | E125 O3P05 | E125 O3P25 |
| 120 | 105 | E105 O3P05 | E105 O3P25 |
| 150 | 88 | E088 O3P05 | E088 O3P25 |
| 180 | 74 | E074 O3P05 | E074 O3P25 |
| 220 | 62 | E062 O3P05 | E062 O3P25 |
| 240 | 45 | E045 O3P05 | E045 O3P25 |
| 280 | 37 | E037 O3P05 | E037 O3P25 |
| 320 | 29 | E029 O3P05 | E029 O3P25 |
| 360 | 23 | E023 O3P05 | E023 O3P25 |
| 400 | 17 | E017 O3P05 | E017 O3P25 |
| 500 | 13 | E013 O3P05 | E013 O3P25 |
| 600 | 9 | E009 O3P05 | E009 O3P25 |
| 800 | 7 | E007 O3P05 | E007 O3P25 |
| 1000 | 5 | E005 O3P05 | E005 O3P25 |
| 1200 | 3 | E003 O3P05 | E003 O3P25 |
BIOLAP® paste Cr L series Silicon carbide (SIC)
Conventional abrasives and chromium oxide
Lapping polishing
Operations under high constraints
Resistant to friction and heating
For personalised formulation please contact us (free estimate).
| Pot 50 cm3 | Pot 250 cm3 | ||
| FEPA |
µm | Ref. | Ref. |
| 80 | 177 | E177 O5P05 | E177 O5P25 |
| 100 | 125 | E125 O5P05 | E125 O5P25 |
| 120 | 105 | E105 O5P05 | E105 O5P25 |
| 150 | 88 | E088 O5P05 | E088 O5P25 |
| 180 | 74 | E074 O5P05 | E074 O5P25 |
| 220 | 62 | E062 O5P05 | E062 O5P25 |
| 240 | 45 | E045 O5P05 | E045 O5P25 |
| 280 | 37 | E037 O5P05 | E037 O5P25 |
| 320 | 29 | E029 O5P05 | E029 O5P25 |
| 360 | 23 | E023 O5P05 | E023 O5P25 |
| 400 | 17 | E017 O5P05 | E017 O5P25 |
| 500 | 13 | E013 O5P05 | E013 O5P25 |
| 600 | 9 | E009 O5P05 | E009 O5P25 |
| 800 | 7 | E007 O5P05 | E007 O5P25 |
| 1000 | 5 | E005 O5P05 | E005 O5P25 |
| 1200 | 3 | E003 O5P05 | E003 O5P25 |
CLASSICAL abrasive pastes
High concentration abrasive compound. Optimises the texture of the abrasive film in order to obtain a rapid, maximal and extended abrasion. Non greasy, miscible to water and to the additive 716.
CLASSICAL paste Aluminium oxide (AI2O3)
Abrasifs conventionnels
High purity
For personalised formulations, please contact us (free estimate).
| Pot 1 kg |
Seau 10 kg |
||
| FEPA |
µm | Ref. | Ref. |
| 100 | 125 | A125 R101K | A125 R110K |
| 120 | 105 | A105 R101K |
A105 R110K |
| 150 | 88 | A088 R101K |
A088 R110K |
| 180 | 74 | A074 R101K |
A074 R110K |
| 220 | 62 | A062 R101K |
A062 R110K |
| 240 | 45 | A045 R101K |
A045 R110K |
| 280 | 37 | A037 R101K |
A037 R110K |
| 320 | 29 | A029 R101K |
A029 R110K |
| 360 | 23 | A023 R101K |
A023 R110K |
| 400 | 17 | A017 R101K |
A017 R110K |
| 500 | 13 | A013 R101K |
A013 R110K |
| 600 | 9 | A009 R101K |
A009 R110K |
| 800 | 7 | A007 R101K |
A007 R110K |
| 1000 | 5 | A005 R101K |
A005 R110K |
| 1200 | 3 | A003 R101K |
A003 R110K |
CLASSICAL paste Silicon carbide (SIC)
Abrasifs conventionnels
High purity
For personalised formulations, please contact us (free estimate).
| Pot 1 kg |
Seau 10 kg |
||
| FEPA |
µm | Ref. | Ref. |
| 120 ébauche | 105 | E105 R101K |
E105 R110K |
| 180 moyen | 74 | E074 R101K |
E074 R110K |
| 240 fine | 45 | E045 R101K |
E045 R110K |
| 320 | 29 | E029 R101K |
E029 R110K |
| 400 | 17 | E017 R101K |
E017 R110K |
| 500 | 13 | E013 R101K |
E013 R110K |
| 600 | 9 | E009 R101K |
E009 R110K |
| 1000 | 5 | E005 R101K |
E005 R110K |
| 1200 | 3 | E003 R101K |
E003 R110K |
AQUA LAM® abrasive powders
AQUA LAM® powder Aluminium oxide (AI2O3)
Standard abrasive
High purity
Commonly called “ polishing alumina”, chemical symbol Al2O3. They are composed of various family: purified aluminas, melted aluminas, calcinated aluminas, submicron aluminas. Their choice is defined according to result criterias and economical expectancies. Grains included between 0,03 micron and 200 microns.
| Bucket 5 kg |
Bucket 25 kg |
||
| FEPA |
µm | Ref. | Ref. |
| 100 | 125 | A125 P105K | A125 P125K |
| 120 | 105 | A105 P105K |
A105 P125K |
| 150 | 88 | A088 P105K |
A088 P125K |
| 180 | 74 | A074 P105K |
A074 P125K |
| 220 | 62 | A062 P105K |
A062 P125K |
| 240 | 45 | A045 P105K |
A045 P125K |
| 280 | 37 | A037 P105K |
A037 P125K |
| 320 | 29 | A029 P105K |
A029 P125K |
| 360 | 23 | A023 P105K |
A023 P125K |
| 400 | 17 | A017 P105K |
A017 P125K |
| 500 | 13 | A013 P105K |
A013 P125K |
| 600 | 9 | A009 P105K |
A009 P125K |
| 800 | 7 | A007 P105K |
A007 P125K |
| 1000 | 5 | A005 P105K |
A005 P125K |
| 1200 | 3 | A003 P105K |
A003 P125K |
| 1500 | 1 | A001 P105K | A001 P125K |
AQUA LAM® powder Silicon carbide (SIC)
Standard abrasive
High purity
The silicon carbide is a pure chemical corps, chemical symbol SiC. The grains are grey,
green or black. The grain F1500 used for specific super-finishing is grey. The silicon carbide AQUA LAM® endures a special treatment and a separation under a high magnetic intensity to insure a dusting and a maximal cleaning. AQUA LAM® proposes all the grains FEPA F useful in lapping, from F60 (250 microns) to F1200 (3 microns).
| Bucket 5 kg |
Bucket 25 kg |
||
| FEPA |
µm | Ref. | Ref. |
| 60 | 250 | E250 P105K | E250 P125K |
| 80 | 177 | E177 P105K | E177 P125K |
| 100 | 125 | E125 P105K | E125 P125K |
| 120 | 105 | E105 P105K |
E105 P125K |
| 150 | 88 | E088 P105K |
E088 P125K |
| 180 | 74 | E074 P105K |
E074 P125K |
| 220 | 62 | E062 P105K |
E062 P125K |
| 240 | 45 | E045 P105K |
E045 P125K |
| 280 | 37 | E037 P105K |
E037 P125K |
| 320 | 29 | E029 P105K |
E029 P125K |
| 360 | 23 | E023 P105K |
E023 P125K |
| 400 | 17 | E017 P105K |
E017 P125K |
| 500 | 13 | E013 P105K |
E013 P125K |
| 600 | 9 | E009 P105K |
E009 P125K |
| 800 | 7 | E007 P105K |
|
| 1000 | 5 | E005 P105K |
|
| 1200 | 3 | E003 P105K |
AQUA LAM® powder Cerium oxide (CeO2)
Chemical symbol CeO2. Used in super finishing mostly for the polishing of glass (example BK7, 520 knoops) the cerium oxide reduces the roughness by a chemical and mechanical actions. Selected according to its maximum polishing action, the cerium oxide AQUA LAM® has grains from 3 to 0,5 microns (other grains dimensions on demand).
| Pot 500 g | Pot 1 kg | ||
| FEPA |
µm | Ref. | Ref. |
| 1200 | 3 | I003 P1P5K |
I003 P101K |
| 1300 | 2 | I002 P1P5K | I002 P101K |
| 1400 | 1 | I001 P1P5K | I001 P101K |
| 1500 | 0,7 | JP70 P1P5K | JP70 P101K |
| 1600 | 0,5 | JP50 P1P5K | JP50 P101K |
+33 (0)4 50 43 96 30