Diamond tools and carbide end mills

Diamond grinding points, files & carbide end mills


Diamond grinding points series 6800

Accurate grinding, deburring, levelling, etching. Advantages in comparison with corundum grinders: better surface finish and low wear and tear with small diameters or points. High durability.

 

Diamond grinding point series 6800 - 2,1 x 2,1 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 21210 00

Diamond grinding point series 6800 - 3,5 x 3,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 35350 00

Diamond grinding point series 6800 - 1,6 x 1,6 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 16160 00

Diamond grinding point series 6800 - 1,8 x 1,6 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 18160 00

Diamond grinding point series 6800 - 2,7 x 2,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 27250 00

Diamond grinding point series 6800 - 3,7 x 3 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 37300 00

Diamond grinding point series 6800 - 4,7 x 3 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 47300 00

Diamond grinding point series 6800 - 2,9 x 6 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 30600 00

Diamond grinding point series 6800 - 4,7 x 1,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 47150 00

Diamond grinding point series 6800 - 8 x 2,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 80220 00

Diamond grinding point series 6800 - 16 x 3 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 16270 00

Diamond grinding point series 6800 - 8,0 x 0,6 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 80050 00

Diamond grinding point series 6800 - 4,7 x 1,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 47100 00

Diamond grinding point series 6800 - 2,7 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 27800 00

Diamond grinding point series 6800 - 3,1 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 31850 00

Diamond grinding point series 6800 - 5,0 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 50130 00

Diamond grinding point series 6800 - 1,6 x 6,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 16650 00

Diamond grinding point series 6800 - 2,1 x 7 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 21700 00

Diamond grinding point series 6800 - 2,7 x 8 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 27801 00

Diamond grinding point series 6800 - 3,1 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 30850 00

Diamond grinding point series 6800 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48130 00

Diamond grinding point series 6800 - 8,0 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 80130 00

Diamond grinding point series 6800 - 3,1 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 30900 00

Diamond grinding point series 6800 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48131 00

Diamond grinding point series 6800 - 2,7 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 27850 00

Diamond grinding point series 6800 - 3,1 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 31851 00

Diamond grinding point series 6800 - 2,1 x 7 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 21701 00

Diamond grinding point series 6800 - 3,1 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 31852 00

Diamond grinding point series 6800 - 1,6 x 6,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 16651 00

Diamond grinding point series 6800 - 3,1 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 31853 00

Diamond grinding point series 6800 - 3,1 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 31854 00

Diamond grinding point series 6800 - 5 x 10 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48100 00

Diamond grinding point series 6800 - 5 x 8 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48800 00

Diamond grinding point series 6800 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48132 00

Diamond grinding point series 6800 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 48133 00

Diamond grinding point series 6800 - 8,0 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 80131 00

Diamond grinding point series 6800 - 8,0 x 3,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 80300 00

Diamond grinding point series 6800 - 22 x 0,3 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 22100 00

Diamond grinding point series 6800 - 22 x 0,4 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 22200 00

Diamond grinding point series 6800 - 22 x 0,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 120 - 1 unit

46 22300 00


Diamond grinding points series 7400

Meulage précis, ébavurage, mise à la cote, gravure. Avantages par rapport aux meules corindon : obtention d’un meilleur état de surface et dans les petits diamètres ou pointes, une usure plus faible. Durée de vie importante.


Diamond grinding point series 7400 - 2,3 x 7,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 23700 00

Diamond grinding point series 7400 - 2,7 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 27800 00

Diamond grinding point series 7400 - 5,0 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 50130 00

Diamond grinding point series 7400 - 1,6 x 6,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 16650 00

Diamond grinding point series 7400 - 2,1 x 7 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 21700 00

Diamond grinding point series 7400 - 2,7 x 8 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 27801 00

Diamond grinding point series 7400 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 50131 00

Diamond grinding point series 7400 - 3,1 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 31900 00

Diamond grinding point series 7400 - 5 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 48134 00

Diamond grinding point series 7400 - 2,7 x 8,5 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 27802 00

Diamond grinding point series 7400 - 2,1 x 7 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 21701 00

Diamond grinding point series 7400 - 3,1 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 31850 00

Diamond grinding point series 7400 - 5,0 x 13 mm

Shaft: Ø 3 mm - Length: 38 mm - Grit: 170 - 1 unit

47 50132 00


Diamond files

Diamond files are electroplated, the quality of the coated diamond guarantees even stock removal.
The manufacturing process results in long durability. These tools are mainly used for manual work, pre-polishing or fine deburring.
They can also be mounted in filing or ultrasonic devices. Their length can be reduced simply by cutting with a diamond disc.

Diamond file - Rectangle 1,5 x 5 mm

Length: 140 mm - Surface: 70 mm - Grit: 60 - 1 unit

44 LD211 00

lamplan polissagdeformes outillage 44DL21100

Diamond file - Triangle 1,5 x 5 mm

Length: 140 mm - Surface: 70 mm - Grit: 60 - 1 unit

44 LD212 00

lamplan polissagdeformes outillage 44DL21200

Diamond file - Triangle 3 mm

Length: 140 mm - Surface: 70 mm - Grit: 60 - 1 unit

44 LD213 00

lamplan polissagdeformes outillage 44DL21300

Diamond file - Semi circle 5 mm

Length: 140 mm - Surface: 70 mm - Grit: 60 - 1 unit

44 LD214 00

lamplan polissagdeformes outillage 44DL21400

Diamond file - Rectangle 1,5 x 5 mm

Length: 140 mm - Surface: 70 mm - Grit: 60 - 1 unit: mesh

44 LD215 00

lamplan polissagdeformes outillage 44DL21500

Diamond file - Rectangle 1,5 x 5 mm

Length: 140 mm - Surface: 50 mm - Grit: 60 - 1 unit: mesh

44 LD311 00

lamplan polissagdeformes outillage 44DL31100

Diamond file - Rectangle 1,5 x 5 mm

Length: 140 mm - Surface: 50 mm - Grit: 140 - 1 unit: mesh

44 LD411 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Semi circle 5 mm

Length: 140 mm - Surface: 50 mm - Grit: 60 - 1 unit: mesh

44 LD314 00

lamplan polissagdeformes outillage 44DL31400

Diamond file - Semi circle 5 mm

Length: 140 mm - Surface: 50 mm - Grit: 140 - 1 unit: mesh

44 LD414 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Square 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 60 - 1 unit: mesh

44 LD316 00

lamplan polissagdeformes outillage 44DL31600

Diamond file - Square 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 140 - 1 unit: mesh

44 LD416 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Round Ø 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 60 - 1 unit: mesh

44 LD317 00

lamplan polissagdeformes outillage 44DL31700

Diamond file - Round Ø 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 140 - 1 unit: mesh

44 LD417 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Triangle 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 60 - 1 unit: mesh

44 LD313 00

lamplan polissagdeformes outillage 44DL31300

Diamond file - Triangle 3 mm

Length: 140 mm - Surface: 50 mm - Grit: 140 - 1 unit: mesh

44 LD413 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Flat 0,4 x 12 mm

Length: 147 mm - Surface: 95 mm - Grit: D76 - 1 unit: fepa

44 LD418 00

lamplan polissagdeformes outillage 44DL41800

Diamond file - Flat 0,6 x 12 mm

Length: 147 mm - Surface: 95 mm - Grit: D76 - 1 unit: fepa

44 LD419 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Flat 0,8 x 12 mm

Length: 147 mm - Surface: 95 mm - Grit: D76 - 1 unit: fepa

44 LD420 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Flat 1 x 12 mm

Length: 147 mm - Surface: 95 mm - Grit: D76 - 1 unit: fepa

44 LD421 00

lamplan polissagdeformes limes 44ld21100

Diamond file - Rectangle 5 x 20 mm

Length: 147 mm - Surface: 95 mm - Grit: D126 - 1 unit: fepa

44 LD422 00

lamplan polissagdeformes outillage 44DL42200

Diamond file - Round Ø 1 mm - Grit 320

Length: 175 mm - Surface: 40 mm - Shaft Ø 1 mm - 1 unit

49 LD330 20

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 1 mm - Grit 500

Length: 175 mm - Surface: 40 mm - Shaft Ø 1 mm - 1 unit

49 LD330 30

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 2,2 mm - Grit 220

Length: 175 mm - Surface: 50 mm - Shaft Ø 2,2 mm - 1 unit

49 LD330 70

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 3 mm - Grit 220

Length: 175 mm - Surface: 50 mm - Shaft Ø 3 mm - 1 unit

49 LD331 20

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 3,5 mm - Grit 140

Length: 1110 mm - Surface: 60 mm - Shaft Ø 3,5 mm - 1 unit

49 LD331 60

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 3,5 mm - Grit 220

Length: 1110 mm - Surface: 60 mm - Shaft Ø 3,5 mm - 1 unit

49 LD311 20

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 3,5 mm - Grit 320

Length: 1110 mm - Surface: 60 mm - Shaft Ø 3,5 mm - 1 unit

49 LD311 30

lamplan polissagdeformes limes 49ld33020

Diamond file - Round Ø 4 mm - Grit 320

Length: 200 mm - Surface: 70 mm - Shaft Ø 4 mm - 1 unit

49 LD332 20

lamplan polissagdeformes limes 49ld33020


Diamond files kit


Diamond files kit 12 units

44 LD500 00
 Standard   
 Details (mm)
Dim.
Grit µm
Qty. 
Long. 72
Surf. 15
lamplan polissagdeformes limes 49ld33020 2 200 1
400 1
600 1
Long. 72
Surf. 15
lamplan polissagdeformes limes 49ld33020 2 200 1
400 1
600 1
Long. 56
Surf. 15
lamplan polissagdeformes limes 49ld33020 2 200 1
400 1
600 1
Long. 56
Surf. 15
lamplan polissagdeformes limes 49ld33020 2 200 1
400 1
600 1


Diamond files


Diamond file - Rectangle - 6 x 1,5 x 30 mm

Shaft Ø 3 mm: 110 mm - Grit: 150 - 1 unit

49 LD422 00

Diamond file - Semi circle - 5 x 2 x 30 mm

Shaft Ø 3 mm: 110 mm - Grit: 150 - 1 unit

49 LD423 00

Diamond file - Round - Ø 3 x 30 mm

Shaft Ø 3 mm: 110 mm - Grit: 150 - 1 unit

49 LD424 00

Diamond file - Square - 2,5 x 2,5 x 30 mm

Shaft Ø 3 mm: 110 mm - Grit: 150 - 1 unit

49 LD425 00

Diamond file - Triangle - 3,5 x 30 mm

Shaft Ø 3 mm: 110 mm - Grit: 150 - 1 unit

49 LD426 00

Diamond file - Rectangle - 6 x 1 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD427 00

Diamond file - Square - 2 x 2 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD428 00

Diamond file - Rectangle - 3 x 1,5 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD429 00

Diamond file - Triangle - 3 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD430 00

Diamond file - Semi circle - 5 x 2 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD431 00

Diamond file - Rectangle - 4 x 1,5 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD432 00

Diamond file - Ovaal - 4 x 2,5 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD433 00

Diamond file - Round - Ø 2 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD434 00

Diamond file - Triangle - 5 x 5 x 1,5 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD435 00

Diamond file - Round - Ø 2,5 x 20 mm

Shaft Ø 3 mm: 120 mm - Grit: 150 - 1 unit

49 LD436 00

Diamond file - Rectangle - 5,8 x 1,2 x 20 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD437 00

Diamond file - Rectangle - 3,2 x 1,4 x 20 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD438 00

Diamond file - Semi circle - 5 x 2 x 22 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD439 00

Diamond file - Rectangle - 3,1 x 1,4 x 24 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD440 00

Diamond file - Round - Ø 3 x 20 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD441 00

Diamond file - Round - Ø 3 x 30 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD442 00

Diamond file - Triangle - 2,5 x 25 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD443 00

Diamond file - Rectangle - 3,2 x 1,4 x 25 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD444 00

Diamond file - Rectangle - 3,2 x 1,4 x 25 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD445 00

Diamond file - Ovaal - 4 x 2 x 20 mm

Shaft Ø 3 mm: 40 mm - Grit: 200 - 1 unit

49 LD446 00

Diamond file - Rectangle - 4 x 1,2 x 28 mm

Shaft Ø 3 mm: 55 mm - Grit: 200 - 1 unit

49 LD447 00

Diamond file - Semi circle - 5 x 2 x 28 mm

Shaft Ø 3 mm: 55 mm - Grit: 200 - 1 unit

49 LD448 00

Diamond file - Round - Ø 3 x 34 mm

Shaft Ø 3 mm: 55 mm - Grit: 200 - 1 unit

49 LD449 00

Diamond file - Square - 2,5 x 2,5 x 34 mm

Shaft Ø 3 mm: 55 mm - Grit: 200 - 1 unit

49 LD450 00


Carbide end mills


Carbide end mill - 3 x 14 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC301 00

Carbide end mill - 2,5 x 11 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC252 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 1,5 x 6 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC153 00

* Included in 9-piece carbide end mills kit

Carbide end mill - Ø 3 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC313 00

Carbide end mill - 3 x 14 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC305 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 2,5 x 11 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC306 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 3 x 12 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC257 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 3 x 6 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC308 00

Carbide end mill - 3 x 12 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC309 00

Carbide end mill - 3 x 10 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC310 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 3 x 6 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC311 00

Carbide end mill - 3 x 6 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC312 00

* Included in 9-piece carbide end mills kit

Carbide end mill - Ø 3 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC304 00

* Included in 9-piece carbide end mills kit

Carbide end mill - Ø 2,5 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC251 40

Carbide end mill - 3 x 16 x 7 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC315 00

Carbide end mill - 3 x 11 x 14 mm*

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC316 00

* Included in 9-piece carbide end mills kit

Carbide end mill - 3 x 9 x 12 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC317 00

Carbide end mill - 3 x 12 x 8 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC318 00

Carbide end mill - 3 x 9 x 8 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC319 00

Carbide end mill - 3 x 9 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC320 00

Carbide end mill - 3 x 6 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC321 00

Carbide end mill - 3 x 6 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC322 00

Carbide end mill - 3 x 5 x 10 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC323 00

Carbide end mill - 2,5 x 3 x 10 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC252 40

Carbide end mill - 0,9 x 0, 75 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC409 00

Carbide end mill - 1 x 0, 8 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC410 00

Carbide end mill - 1,2 x 1 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC412 00

Carbide end mill - 1,4 x 1,2 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC414 00

Carbide end mill - 1,6 x 1,4 mm

Shaft: Ø 3 mm - Length: 38 mm - 1 unit

40 FC416 00


Carbide end mills kit


Carbide end mills kit 9 units

40 FC120 00
 Type
Dim. (mm) Length
Qty. 
lamplan polissagdeformes outillage 40FC25200 2,5 x 11 38 mm 1
lamplan polissagdeformes outillage 40FC25200 1,5 x 6 38 mm 1
lamplan polissagdeformes outillage 40FC25200 3 x 14 38 mm 1
lamplan polissagdeformes outillage 40FC25200 2,5 x 11 38 mm 1
lamplan polissagdeformes outillage 40FC25200 3 x 12 38 mm 1
lamplan polissagdeformes outillage 40FC25200 3 x 10 38 mm 1
lamplan polissagdeformes outillage 40FC25200 3 x 6 38 mm 1
lamplan polissagdeformes outillage 40FC25200 Ø 3 38 mm 1
lamplan polissagdeformes outillage 40FC25200 3 x 11 x 14 38 mm 1

In the same category Tools

  • Disc holders & rectangular supports

  • Lapping rods

  • Brushes

  • Felt & wooden rotary

  • Abrasive discs & caps

  • Abrasives on rod

  • Abrasive stones

  • Abrasive rectangular rods

  • Diamond tools & carbide end mills

  • Tools kits

    Assistance & information

    The health situation makes it necessary to adapt our organization and the activity of our services.

    We will contact you

    Get a call from a LAM PLAN advisor.

    Contact us

    Committed to providing you with quality answers, we invite you to send us a message with your contact details so that our staff can answer you as soon as possible.


    Our social networks

    • Lapping supports
    • Pre-polishing discs
    • Abrasive liquids
    • Polishing supports
    • Diamond polishing liquids
    • Diamond lapping liquids
    • Diamond superfinition products
    • Abrasive liquids

      All rights reserved © LAM PLAN SA 2020
      Made by : CtoutcomStudio

      Contact us

      LAM PLAN SA
      7, rue des Jardins - B.P.15
      74240 Gaillard - France
      header-receiver +33 (0)4 50 43 96 30

      Our dealers