Accessories for micromotors
Jaws, regulator, replacement carbon brushes and compressor
Jaws for hand-held devices
Jaws for hand-held devices Ø 2,35 mm
10 1090 13
Compatibility
- Straight red rotary device
- Green bent 90° rotary device
- Green bent 120° rotary device
- “Super light” rotary device
- Micro-motor M.M.886
Jaws for hand-held devices Ø 3,0 mm
10 1090 07
Compatibility
- Straight red rotary device
- Green bent 90° rotary device
- Green bent 120° rotary device
- “Super light” rotary device
- Micro-motor M.M.886
Jaws for hand-held devices Ø 3,175 mm
10 1090 11
Compatibility
- Straight red rotary device
- Green bent 90° rotary device
- Green bent 120° rotary device
- “Super light” rotary device
- Micro-motor M.M.886
Jaws for hand-held devices Ø 6,0 mm
10 1090 07
Compatibility
- Straight red rotary device with reinforced head
Jaws for hand-held devices Ø 3,0 mm
10 1072 51
Compatibility
- Straight red rotary device with reinforced head
Jaws 1 for ultrasonic micromotor M.M.885
| 2 units | |||
| Type | mm | Grain | Ref. |
 |
Ø 2 | - | 40 US005 00 |
| Ø 3 | - | 40 US006 00 | |
Jaws 2 for ultrasonic micromotor M.M.885
| 2 units | |||
| Type | mm | Grain | Ref. |
 |
t = 0,5 | - | 40 US015 00 |
| t = 0,8 | - | 40 US016 00 | |
| t = 1 | - | 40 US018 00 | |
| t = 2 | - | 40 US007 00 | |
| t = 3 | - | 40 US008 00 | |
Compressor
Foot pedal REGULATOR for m.M.880 and 885
10 88034 00
In combination with the M.M.880 and M.M.885 controllers, the pedal regulator provides on/off and foot speed control functions.
- Fonctions: Start/stop and dimmer
- Dimensions W x H x D: 90 x 75 x 190 mm
- Cable: L 1,85 m
- Weight: 490 gr
Replacement carbon brushes
Replacement carbon brushes for micromotors
| Type | Ref. |
| Straight red rotary device | 10 1070 82 |
| Straight red rotary device with reinforced head | 10 1070 82 |
| Grey filing device | 10 1070 84 |
| “Super light” rotary device | 10 1070 83 |
| Green bent 90° rotary device | 10 1070 82 |
| Green bent 120° rotary device | 10 1070 82 |
| M.M.886 | 10 1070 66 |
Compressor
Diaphram compressor
60 COM00 00
Diaphragm compressor for laboratories which are not equipped with a compressed air network. Silent operation. Price on demand.
- Output: 50 l/min
- Pressure: 8 bar
- Dimensions L X H X D : 330 x 500 x 330 mm
Guidance
Maintenance and repairs
In order to always get the best and to prolong the life of your equipment, LAM PLAN offers you preventive and curative maintenance services on all its range of shape polishing equipment.
Do not hesitate to contact your usual contact person, after taking charge of your project in our workshops, we will draw up a personalised estimate.
In the same category Geometric polishing
With the support
+33 (0)4 50 43 96 30